進口電液動刀形閘閥的選型依據德國洛克 

 

一、進口電液動刀形閘閥產品性能：

1、公稱壓力：PN1.0～1.6Mpa

2、通徑范圍：DN50～DN2000

3、連接形式：梅花法蘭式、法蘭式等

4、傳動機構：電動執行器

5、主要材質：CF8

6、閘板材質：2Cr13、201、304、316、316L

7、適用溫度：≤300℃

8、泄漏等級：A級（零泄漏）

9、密封形式：X

10、填料密封：含油四氟盤根

11、適用介質：適用于礦山電廠的選煤、排渣、食品、造紙、醫藥、化工等管路上，接通或截?cái)喙苈分械乃酀{、金礦粉、礦砂、爐渣、煤泥、紙漿、木漿、尾礦、纖維、粉塵、化學品處理污水、沉淀池、瀝青、料倉出口等介質。

 

二、進口電液動刀形閘閥產品特點：

1、機、電、液、儀一體化，實現現場控制，集中監控或自動控制。

2、無級調力，運行平穩，沖擊力小，適用于較高壓力場合。

3、節能，液壓傳動效率高達80%

4、閥門整體結構緊湊，體積小，無需液壓泵站。  

5、可控制任意閥位并可鎖定。

 

三、進口電液動刀形閘閥產品概述：

德國《DE LOCKE》洛克進口電液動刀形閘閥也叫電液動刀閘閥，適用于帶有懸浮顆粒、纖維材料的紙漿、污水、煤漿、灰渣水泥混合物等介質的管道，靠可以切割纖維材料的刀刃形閘板來切斷這些介質。閥體實際上不存在腔室，閘板在側面導向槽內升降，并由底部的凸耳緊壓在閥座上，如需達到較高的介質密封性時，可選用O形密封閥座實現雙向密封。

3、 Introduction of imported electro-hydraulic knife gate valve products:
German "de lock" imported electro-hydraulic knife gate valve is also called electro-hydraulic knife gate valve. It is suitable for pipelines with suspended particles, fiber materials, pulp, sewage, coal slurry, ash cement mixture and other media. These media can be cut off by blade gate which can cut fiber materials. In fact, there is no chamber in the valve body. The gate rises and falls in the side guide groove, and is tightly pressed on the valve seat by the lug at the bottom. In order to achieve high medium tightness, the O-shaped sealing valve seat can be selected to achieve bidirectional sealing.
 

四、進口電液動刀形閘閥產品業績：

1、上海紡織(集團)有限公司

2、徐州盛泉洗煤廠

3、浙江華都紡織集團有限公司

4、恒安集團

5、金東紙業有限公司

6、山東晨鳴紙業集團股份有限公司

7、濰坊砂礦有限公司

8、華東有色尾礦公司

9、福建建陽祥康織造有限公司

10、介休市晉強洗煤設備制造有限公司

11、微山縣匯永煤炭洗選有限公司

12、山西臨汾如意洗煤有限公司

13、西湖洗煤廠

14、山東洗煤廠

4、 Performance of imported electro-hydraulic knife gate valve products:
1. Shanghai Textile (Group) Co., Ltd
2. Xuzhou Shengquan coal preparation plant
3. Zhejiang Huadu Textile Group Co., Ltd
4. Hengan Group
5. Jindong Paper Co., Lt
6. Shandong Chenming Paper Group Co., Ltd
7. Weifang placer Co., Ltd
8. East China Nonferrous tailings company
9. Fujian Jianyang Xiangkang Weaving Co., Ltd
10. Jiexiu Jinqiang coal washing equipment manufacturing Co., Ltd
11. Weishan Huiyong coal washing Co., Ltd
12. Shanxi Linfen Ruyi coal preparation Co., Ltd
13. Xihu coal preparation plant
14. Shandong coal preparation plant
 

五、進口電液動刀形閘閥產品維護：

1、手輪、手柄及傳動機構均不允許作起吊用，并嚴禁碰撞。

2、雙閘板閘閥應垂直安裝（即閥桿處于垂直位置，手輪在頂部）。

3、帶有旁通閥的閘閥在開啟前應先打開旁通閥（以平衡進出口的壓差及減小開啟力）。

4、帶傳動機構的閘閥，按產品使用說明書的規定安裝。

5、如果閥門經常開關使用，每月至少潤滑一次。

5、 Maintenance of imported electro-hydraulic knife gate valve:
1. Hand wheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is strictly prohibited.
2. The double gate valve should be installed vertically (i.e. the stem is in the vertical position and the hand wheel is at the top).
3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between the inlet and outlet and reduce the opening force).
4. The gate valve with transmission mechanism shall be installed according to the product manual.
5. If the valve is used frequently, lubricate it at least once a month.