德國進口鍛鋼閘閥-洛克品牌

進口鍛鋼閘閥結構特點:

①流阻小，開關扭矩輕；

②閥門有上密封設計，閥桿采用柔性石墨和石墨盤根密封；

③栓接閥蓋，壓力密封和焊接閥蓋結構，固定閘板；

④全徑和縮徑，波紋管密封設計，低溫結構。

進口鍛鋼閘閥規(guī)格參數：

公稱通徑:DN15~50

適用溫度:-200~650℃

公稱壓力:PN10-32Mpa，ANSI 150~4500LB

連接方式:法蘭，螺紋，承插焊，對焊

閥體材質:A105、LF2、F316

閥板材質:A105、F316

閥桿材質:F6,F316

閥座材質:Satellite

Specifications and parameters of imported forged steel gate valve:
Nominal diameter: DN 15 ~ 50
Applicable temperature: - 200 ~ 650 ℃
Nominal pressure: pn10-32mpa, ANSI 150 ~ 4500lb
Connection mode: flange, thread, socket welding, butt welding
Valve body material: A105, LF2, F316
Material of valve plate: 316, fa105
Stem material: F6, F316
Valve seat material: Satellite

進口鍛鋼閘閥工作原理:

鍛鋼閘閥適用于適用于水、蒸汽、油品、硝酸、醋酸、氧化性介質、尿素以及石油管道上。鍛鋼閘閥采用縮徑設計，與同口徑的鑄鋼閘閥相比流量要稍小，但承受的壓力與溫度范圍要比鑄鋼閥門要高，密封性能也要比鑄鋼閘閥要好許多，壽命更長，介質流動方向同其他閘閥一樣不受限制。

Working principle of imported forged steel gate valve:
Forged steel gate valve is suitable for water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea and oil pipeline. The forged steel gate valve adopts the reduced diameter design. Compared with the cast steel gate valve with the same diameter, the flow rate is slightly smaller, but the pressure and temperature range are higher than those of the cast steel gate valve. The sealing performance is much better than that of the cast steel gate valve, and the service life is longer. The medium flow direction is not limited as other gate valves.

進口鍛鋼閘閥產品簡介:

德國洛克《DE LOCKE》進口鍛鋼閘閥有三種閥蓋設計形式。*種是螺栓式閥蓋，按這種設計形式設計的閥門，其閥體與閥蓋用螺栓螺母連接，纏繞式墊片(316夾柔性石墨制造)密封，客戶有特殊要求時也可采用金屬環(huán)連接；*種設計形式是焊接式閥蓋，按這種設計形式的閥門，其閥體與閥蓋用螺紋連接，全焊密封，客戶有特殊要求時也可采用全焊逶連接；第三種是壓力自緊式閥蓋，按這種設計形式設計的閥門，其閥體與閥蓋用螺紋連接，內壓自密封環(huán)密封。

Brief introduction of imported forged steel gate valve products:
There are three kinds of bonnet design forms for the imported forged steel gate valve of German Locke de Locke. The first type is bolted bonnet. The valve body and bonnet are connected by bolts and nuts, and sealed by spiral wound gasket (made of 316 clip flexible graphite). When customers have special requirements, metal ring connection can be used. The second type is welded bonnet. The valve body and bonnet are connected by thread and sealed by full welding When there are special requirements, full welded connection can also be used; the third type is pressure self tightening bonnet. For the valve designed according to this design, the valve body and bonnet are connected by thread, and the internal pressure self sealing ring is used for sealing.

進口鍛鋼閘閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參

數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優(yōu)質的服務!