萊恩泵閥制造(珠海)有限公司
店齡5年 · 企業認證 · 廣東省珠海市
手機掃碼查看 移動端的落地頁
進口三閥組品牌廠家-德國洛克
價格
訂貨量(臺)
¥1800.00
≥1
店鋪主推品 熱銷潛力款
莸莾莶莹获莸莶莻莼莶莻
在線客服
萊恩泵閥制造(珠海)有限公司
店齡5年 企業認證
聯系人
葉工
聯系電話
莸莾莶莹获莸莶莻莼莶莻
經營模式
生產商,
所在地區
廣東省珠海市
- 基本信息
- 品牌:德國洛克
- 型號:DE LOCKE
- 驅動方式:手動
- 介質溫度:≤180℃℃
- 工作壓差:PN1.6-32.0Mpa
- 適用介質:水
- 壓力環境:常壓
- 貨號:20204201
- 用途:開關
- 外型尺寸:中型
進口三閥組品牌廠家-德國洛克
一、進口三閥組結構作用:
三閥組是在安裝和撤除的時候,需要用到平衡閥.否則,差壓的量程一般很小,如果廠家的過載能力不強,很容易損壞,在流量傳感器儀表接入工藝管道時要用“三閥組”,作用是:
1、在管道由初始狀態(空)加入介質時,傳感器兩側壓力會突然變化,壓差增大,為避免,應先關閉傳感器兩側的閥A、B,打開旁通閥C;
2、在介質充滿管道,并趨近平穩、平衡后,逐漸打開A、B,使傳感器兩側均勻施加壓力;
3、*關閉閥C,傳感器開始正常工作;
4、關閉順序與上述情況相反。此外,三閥組還有其它作用,如運行一段時間后清洗管道,傳感器部分不受影響(管路被旁通)
二、進口三閥組描述:
德國《DE LOCKE》洛克進口三閥組可配接:3051、3095、1151、EJA、FX-2、FCX-A/C及霍尼韋爾ST3000系列等變送器,由閥體、二個截止閥及一個平衡閥組成,差壓變送器投入運行時的操作程序,打開差壓變送器上兩個排污閥,而后打開平衡閥,再慢慢打開二個截止閥,將導壓管內的空氣或污物排除掉,關閉二個排污閥,再關閉平衡閥,變送器即可投入運行。 差壓變送器零點在線校驗操作程序:先打開平衡閥,關閉二個截止閥,即可對變送器進行零點校驗。
產品名稱 進口三組閥
產品型號 DE LOCKE
產品品牌 德國《DE LOCKE》洛克
產品包裝 木箱
驅動方式 手動
公稱通徑 DN10~DN15
連接方式 螺紋、焊接、卡套
公稱壓力 PN1.6-32.0Mpa
結構形式 截門形
適用溫度 ≤180℃
閥體材質 不銹鋼、合金鋼
制造標準 德國洛克原廠標準
適用介質 氣體、液體及蒸汽等
應用場合 電站、冶金、建筑、鍋爐、設備、管道、熱能、空調、消防、給排水、水處理、石油化工、造紙印刷廠。
產品報價 面議,電議
產品產地 德國
生產廠家 德國洛克閥門國際集團
*代理 萊恩泵閥制造(珠海)有限公司
三、進口三閥組訂貨須知:
A、若訂貨前還未選定型號,請向我們提供您的使用參數:
1.公稱通徑 2.產品型號 3.流體性質(包括公稱壓力、溫度、介質) 4.閥體、密封材料 5.連接方式
B、若已經由設計單位選定我公司的產品型號,請按型號直接向我司銷售部訂購
C、當使用的場合非常重要或管路比較復雜時,請您盡量提供設計圖紙和詳細參數,由我們德國洛克閥門技術員為您審核把關。
D、感謝您訪問我公司的網站,如有任何疑問.
您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!
Inlet three valve manifold
1、 The structure and function of imported three valve manifold are as follows:
The three valve group needs to use the balance valve when installing and removing. Otherwise, the range of differential pressure is generally small. If the overload capacity of the manufacturer is not strong, it is easy to damage. When the flow sensor instrument is connected to the process pipeline, the "three valve group" should be used. Its function is to:
1. When the medium is added into the pipeline from the initial state (empty), the pressure on both sides of the sensor will change suddenly, and the pressure difference will increase. To avoid this, the valves a and B on both sides of the sensor should be closed first, and the bypass valve C should be opened;
2. After the medium fills the pipe and approaches stable and balanced, gradually open a and B to apply pressure evenly on both sides of the sensor;
3. Finally, close the valve C and the sensor starts to work normally;
4. The closing sequence is the reverse of the above. In addition, the three valve group has other functions, such as cleaning the pipeline after a period of operation, and the sensor part is not affected (the pipeline is bypassed)
2、 Description of inlet three valve manifold:
The imported three valve manifold of German "de Locke" can be matched with: 3051, 3095, 1151, EJA, FX-2, fcx-a / C and Honeywell ST3000 series transmitters, which are composed of valve body, two stop valves and one balance valve. The operation procedure of differential pressure transmitter when put into operation, Open the two blowdown valves on the differential pressure transmitter, then open the balance valve, and then slowly open the two stop valves to remove the air or dirt in the pressure pipe, close the two blowdown valves, and then close the balance valve, and the transmitter can be put into operation. Differential pressure transmitter Zero online calibration operation procedure: first open the balance valve, close the two stop valves, then the transmitter zero calibration.
Product Name: imported three group valve
Product model De lock
Product brand German "de lock"
Wooden case for product packaging
Drive mode manual
Nominal diameter: DN 10 ~ DN 15
Connection mode: thread, welding and ferrule
Nominal pressure pn1.6-32.0mpa
Structural form
Applicable temperature ≤ 180 ℃
The valve body is made of stainless steel and alloy steel
Manufacturing standard German original standard
Suitable for medium gas, liquid and steam, etc
Applications: power station, metallurgy, construction, boiler, equipment, pipeline, heat energy, air conditioning, fire protection, water supply and drainage, water treatment, petrochemical, paper and printing plant.
The product quotation is discussed by face to face and by cable
Product origin: Germany
Manufacturer: rockvalve International Group
Designated agent: lain pump valve manufacturing (Zhuhai) Co., Ltd
3、 Instructions for ordering imported three valve manifold:
A. If the model has not been selected before ordering, please provide us with your parameters:
1. Nominal diameter 2. Product model 3. Fluid properties (including nominal pressure, temperature and medium) 4. Valve body and sealing material 5. Connection mode
B. If the product model of our company has been selected by the design unit, please order directly from our sales department according to the model
C. When the use of the occasion is very important or the pipeline is more complex, please try to provide design drawings and detailed parameters, and our German Rockwell valve technician will check for you.
D. Thank you for visiting our website. If you have any questions
You can call us, we will try our best to provide you with high quality service!