進口氣動單座調節閥（歐美品牌）德國洛克

一、進口氣動單座調節閥技術參數及性能：

型 式 直通單座鑄造球形閥

公稱通徑 DN20~500mm

公稱壓力 ANSI 125~600  JIS10、16~40K  PN1.6~6.4MPa

連接型式 法蘭連接：FF、RF、RJ、LG

法蘭標準：JIS B2201-1984、ANSI B16.5-1981、JB79-59等

焊接連接：嵌接焊SW（40～50mm）  對接焊BW（65～200mm）

材 料 鑄鋼（ZG230-450）   鑄不銹鋼（ZG1Cr18Ni9TiZG1Cr18Ni12Mo2Ti、 ZG316L）、鈦等

上 閥 蓋 常溫型（P）：-17～+230℃  伸長Ⅰ型（EⅠ）：-45～-17℃ +230～+566℃  伸長Ⅱ型（EⅡ）：-100～-45℃  伸長Ⅲ型（EⅢ）：-196～-100℃

注：工作溫度不準超過各種材料的允許范圍

壓蓋型式 螺栓壓緊式

填 料 V型聚四氟乙烯填料、含浸聚四氟乙烯石棉填料、石棉編織填料、石墨填料

閥芯型式 單座柱塞型閥芯

材 料 不銹鋼（1Cr18Ni9Ti、1Cr18Ni12Mo2Ti、17-4PH、9Cr18、316L）

不銹鋼堆焊司太萊合金、鈦和耐腐蝕合金等

執行機構

型 式 DE LOCKE多彈簧薄膜執行機構

膜片材料 丁睛橡膠夾尼龍布

彈簧范圍 20～100、80～240kPa

供氣壓力 140～400kPa

氣源接口 Rc14

環境溫度 -30～+70℃

注：該閥也可配用VA5或VA6和LVP型執行機構

閥作用型式 氣—關式或氣—開式

附 件 定位器、空氣過濾減壓器、保位閥、行程開關、閥位傳送器、手輪機構等

性 能

泄 漏 量 金屬閥座：小于閥額定容量的0.01%，符合ANSI B16.104-1976Ⅳ級

軟 閥 座：小于閥額定容量的10-7，符合ANSI B16.104-1976Ⅵ

回 差 帶定位器：小于全行程的1%

不帶定位器：小于全行程的3%

基本誤差 帶定位器：小于全行程的±1%

不帶定位器：小于全行程的±5%

注：采用標準的V型聚四氟乙烯填料時

二、進口氣動單座調節閥描述：

德國《DE LOCKE》洛克進口氣動單座調節閥由DE LOCKE氣動多彈簧薄膜執行機構和低流阻單座閥組成, 以壓縮空氣為動力源，以氣動多彈簧薄膜執行機構為執行器，并借助于電氣閥門定位器、轉換器電磁閥、保位閥等附件去驅動閥門，實現開關量或比例式調節，接收工業自動化控制系統的4-20ma毫安或者0-10V伏的控制信號來完成調節管道介質的：流量、壓力、溫度等各種工藝參數。進口氣動單座調節閥高度低、重量輕、裝備簡便,新型閥體結構緊湊、流道通暢,具有大的流量系數。適用于對泄露量求嚴格、閥前后壓差低及有一定粘度的場合，廣泛應用于電力、冶金、化工、石油、環保、輕工、設備等行業。

2、 Description of single seat regulating valve of inlet pneumatic:
The pneumatic single seat regulating valve imported by de lock in Germany is composed of de lock pneumatic multi spring film actuator and low flow resistance single seat valve, The compressed air is used as the power source, the pneumatic multi spring film actuator is used as the actuator, and the valve is driven by the accessories of the electrical valve positioner, converter solenoid valve and holding valve to realize the switch quantity or proportional adjustment. The control signal of 4-20mA milliampere or 0-10V V of industrial automation control system is received to complete the regulation of the pipeline medium: flow, pressure, temperature, etc Various process parameters. The single seat pneumatic regulating valve is low in height, light in weight, simple in equipment, compact in structure and smooth in flow passage, and has a large flow coefficient. It is suitable for the occasions where the leakage is strict, the pressure difference between the front and rear of the valve is low and has certain viscosity. It is widely used in the electric power, metallurgy, chemical industry, petroleum, environmental protection, light industry, equipment and other industries.

三、進口氣動單座調節閥結構特點：

1、頂導向單座調節閥，結構緊湊，部件少、易維修。

2、金屬閥芯適用多種工作場合，達IV級泄漏標準，LXPQ型軟密封結構閥芯達VI級泄漏標準。

3、閥體按流體力學原理設計成等截面低流阻流道，額定流量系數增大30%。

4、可調范圍大，固有可調比為50。

5、執行機構采用多彈簧結構，高度減少30%、重量減輕30%。

6、波紋管密封型調節閥，對移動的閥桿形成完全的密封，堵絕流體外漏。

7、調節閥帶有保溫夾套，用于流體冷卻后易結晶、凝固造成堵塞的場合。

3、 The structure characteristics of the single seat regulating valve of the inlet pneumatic:
1. The top guide single seat regulating valve has compact structure, few parts and easy to repair.
2. Metal valve core is suitable for many working occasions, reaching class IV leakage standard, lxpq type soft seal structure valve core reaches class VI leakage standard.
3. The valve body is designed as a flow path with equal cross section and low flow resistance according to the principle of hydrodynamics, and the rated flow coefficient increases by 30%.
4. The adjustable range is large and the inherent adjustable ratio is 50.
5. The actuator adopts multi spring structure, with 30% reduction in height and 30% in weight.
6. Bellows sealed regulating valve, which forms complete seal for moving valve stem, blocks fluid leakage.
7. The regulating valve is equipped with heat preservation jacket, which is used in the situation where the fluid is easy to crystallize and solidify after the fluid is cooled.

四、進口氣動單座調節閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供服務!