

萊恩泵閥制造(珠海)有限公司
店齡5年 ·
企業認證 ·
廣東省珠海市
手機掃碼查看 移動端的落地頁
進口自力式減壓閥德國洛克廠家強烈推薦
價格
訂貨量(臺)
¥2600.00
≥1
店鋪主推品 熱銷潛力款
ῡ῟ῢῨΰῡῢῤῥῢῤ
在線客服

萊恩泵閥制造(珠海)有限公司
店齡5年
企業認證
聯系人
葉工
聯系電話
ῡ῟ῢῨΰῡῢῤῥῢῤ
經營模式
生產商,
所在地區
廣東省珠海市
- 基本信息
- 品牌:德國洛克
- 型號:DE LOCKE
- 驅動方式:自力式
- 介質溫度:≤350℃℃
- 工作壓差:1.6~6.4Mpa
- 適用介質:水
- 壓力環境:常壓
- 貨號:20204201
- 用途:調節
- 外型尺寸:中型
進口自力式減壓閥德國洛克廠家強烈推薦
進口自力式減壓閥產品參數:
公稱通徑:DN15-300mm
公稱壓力:1.6、2.5、4.0、6.4Mpa或ANSI150、300、600LB;JIS10K、20K
壓力調節范圍(KPa):15~50、40~80、60~100、80~140、120~180、160~220、200~260、240~300、280~350、330~400、380~450、430~500、480~560、540~620、600~700、680~800、780~900、880~1000、600~1500、1000~2500
固有流量特質:快開
調節精度(%):±5
使用溫度(℃):≤350℃
安裝說明
介質溫度>80℃可時閥倒裝
進口自力式減壓閥產品特點:
1、進口自力式減壓閥無需外加能源,能在無電無氣的場所工作,既方便又節約了能源。
2、進口自力式減壓閥閥后壓力分段范圍細且互相交叉,調節精度高。
3、進口自力式減壓閥閥后壓力設定值在運行期間可連續設定。
4、進口自力式減壓閥對閥后閥后壓力調節,閥前閥后壓力與閥后閥后壓力之比可為10:1~10:8。
5、進口自力式減壓閥橡膠膜片式檢測,執行機構測精度高、動作靈敏。
6、進口自力式減壓閥采用閥后壓力平衡機構,使調節閥反應靈敏、控制精確。
Features of imported self-contained pressure reducing valve products:
1. The imported self-contained pressure reducing valve can work in the place without electricity and gas without additional energy, which is convenient and energy saving.
2. The pressure section of the inlet self pressure reducing valve is fine and cross each other, and the adjustment accuracy is high.
3. The pressure setting value after the inlet self pressure reducing valve can be set continuously during operation.
4. The pressure of the inlet self pressure reducing valve is adjusted to the back pressure of the valve. The ratio between the pressure behind the front valve and the back valve can be 10:1-10:8.
5. The rubber diaphragm type inspection of imported self pressure reducing valve has high precision and sensitive action.
6. The pressure balance mechanism behind the valve is adopted for the imported self pressure reducing valve, which makes the control valve sensitive and accurate.
進口自力式減壓閥產品簡介:
德國洛克《DE LOCKE》進口自力式減壓閥,Self-reducing valve,可調式減壓閥,可調式調節閥,無需外加能源,利用被調介質自身能量為動力源引入執行機構控制閥芯位置,改變兩端的壓差和流量,使閥后壓力穩定在所需要的閥后壓力值的調節閥。德國洛克DE LOCKE自力式閥后壓力調節閥具有動作靈敏,密封性好,閥后壓力設定點波動力小等優點,廣泛應用于氣體、液體及蒸汽介質減壓穩壓或泄壓穩壓的自動控制。
Introduction to imported self pressure reducing valve products:
Self reducing valve, self reducing valve, adjustable pressure reducing valve and adjustable regulating valve are imported from de lock, Germany. The actuator is used to control the valve core position by using the energy of the regulated medium to control the valve core position, change the pressure difference and flow at both ends, and stabilize the pressure behind the valve in the required post valve pressure value. The pressure regulating valve of the self-propelled valve of Locke de lock in Germany has the advantages of sensitive action, good sealing, small wave power at the pressure setting point behind the valve, etc. it is widely used in the automatic control of pressure reduction and pressure relief and pressure relief in gas, liquid and steam medium.
進口自力式調壓閥訂貨須知:
A、若訂貨前還未選定型號,請向我們提供您的使用參數:
1.公稱通徑 2.產品型號 3.流體性質(包括公稱壓力、溫度、介質) 4.閥體、密封材料 5.連接方式
B、若已經由設計單位選定我公司的產品型號,請按型號直接向我司銷售部訂購
C、當使用的場合非常重要或管路比較復雜時,請您盡量提供設計圖紙和詳細參數,由我們德國洛克閥門技術員為您審核把關。
D、感謝您訪問我公司的網站〖〗,如有任何疑問.
您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!
