進口內螺紋高壓電磁閥德國洛克品牌產品列表

 

進口內螺紋高壓電磁閥工作原理：

常閉：當線圈通電時，先導閥芯吸合，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開；當線圈斷電時，先導閥芯靠彈簧復位，先導孔關閉，閥腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。

常開：當線圈通電時，先導孔關閉，閥上腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。當線圈斷電時，先導閥芯靠彈簧復位，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開。

 

進口內螺紋高壓電磁閥技術參數：

公稱通徑：DN1～100mm

原理結構：先導活塞式

工作環境溫度：-10～+50℃ -40～+80℃

線圈工作溫度： <+50℃、<+85℃

控制方式：常閉、常開、自保持

流通流體壓力： 0.1～200Mpa

閥體材質：鑄鋼、不銹鋼304、316。

適用介質：氣、水、油、蒸汽、燃氣、腐蝕性流體。

介質溫度：-200～+450℃。

介質粘度：小于50CSt （大于50時需定制）。

防護性能：防水、防塵、防爆（Exd IICT5）、防腐。

閥芯材質： 均為不銹鋼。

接線方式：接線座式、引線式、插頭式。

電源電壓：DC12、DC24V、DC36V、DC110V、DC127V、DC220V、DC380V；

AC24V、AC36、AC110V、AC127V、AC220V、AC380V。

連接方式：內螺紋

泄 漏 量：零

備 注：特殊型可定制。

Technical parameters of imported internal thread high pressure solenoid valve:
Nominal diameter: DN 1 ～ 100 mm
Principle and structure: pilot piston type
Working environment temperature: - 10 ～ + 50 ℃ - 40 ～ + 80 ℃
Coil working temperature: < + 50 ℃ and < + 85 ℃
Control mode: normally closed, normally open, self holdin
Circulating fluid pressure: 0.1 ~ 200MPa
Valve body material: cast steel, stainless steel 304, 316.
Applicable media: gas, water, oil, steam, gas, corrosive fluid.
Medium temperature: - 200 ～ + 450 ℃.
Medium viscosity: less than 50cst (customized when more than 50).
Protection performance: waterproof, dustproof, explosion-proof (Exd iict5), anti-corrosion.
Material of valve core: stainless steel.
Wiring mode: wiring base type, lead type, plug type.
Power supply voltage: DC12, DC24 V, dc36 V, dc110 V, dc127 V, DC220 V, dc380 V;
AC24V、AC36、AC110V、AC127V、AC220V、AC380V。
Connection mode: internal thread
Leakage: Zero
Note: special type can be customized.
 

進口內螺紋高壓電磁閥描述：

德國《DE LOCKE》洛克進口內螺紋高壓電磁閥閥芯均為不銹鋼活塞式，活塞環不會被介質中的雜質卡死，動密封性能高,壽命長；活塞與金屬閥腔不產生直接摩擦，閥體安裝向無限制；專制線圈，不易燒毀；長時間停止動作重新啟動，動作同樣靈敏；zui低啟動工作壓力0.5MPa。

廣泛應用在航天、船舶重工、石油化工、給排水、消防設備、食品醫療設備、清洗設備、景觀噴灌、加濕設備、液壓設備、測試設備、水廠等,工作壓力在6.4---100MPa的管道系統中。

Description of inlet internal thread high pressure solenoid valve:
The valve cores of the high pressure solenoid valve with internal thread imported from Germany "de Locke" are all stainless steel piston type, the piston ring will not be stuck by impurities in the medium, and the dynamic sealing performance is high, Long service life; no direct friction between piston and metal valve chamber, unlimited installation direction of valve body; autocratic coil, not easy to burn; long time stop action and restart, action is also sensitive; Zui low start working pressure 0.5MPa.
It is widely used in aerospace, shipbuilding industry, petrochemical industry, water supply and drainage, fire fighting equipment, food and medical equipment, cleaning equipment, landscape sprinkler irrigation, humidification equipment, hydraulic equipment, testing equipment, water plant, etc., with working pressure of 6.4-100mpa.

 

進口內螺紋高壓電磁閥結構特點：

1、電磁閥內部組件均為不銹鋼制造，采用數控加工中心制成，控制尺寸精度高，產品互換性好。

2、活塞環采用耐磨特殊材料，伸展自如，不會被介質中的雜質卡死，具有自動間隙補償功能，動密封性能高。

3、金屬活塞與金屬閥腔不產生直接摩擦，活塞壽命增長，可連續動作百萬次以上。

4、閥體的安裝方位不受限制，垂直、水平、傾斜都可以。

5、專制線圈，線圈不易燒毀。合理的密封結構，密封性能更好。

6、長期停止動作后的重新啟動，動作同樣靈敏。

Structure features of imported internal thread high pressure solenoid valve:
1. The internal components of the solenoid valve are all made of stainless steel and made of CNC machining center, with high precision and good interchangeability.
2. The piston ring is made of special wear-resistant material, which can stretch freely and will not be stuck by impurities in the medium. It has automatic clearance compensation function and high dynamic sealing performance.
3. There is no direct friction between the metal piston and the metal valve cavity, the service life of the piston increases, and the piston can move continuously for more than one million times.
4. The installation position of the valve body is not limited, vertical, horizontal and inclined.
5. Autocratic coil, coil is not easy to burn. Reasonable sealing structure, better sealing performance.
6. After a long-term stop action, restart, action is also sensitive.
 

進口內螺紋高壓電磁閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!