進口帶信號反饋電磁閥產品報價-德國洛克品牌

 

進口帶信號反饋電磁閥優點：

獨特設計、與介質非接觸式信號返饋、信號返饋靈敏，能可靠指示閥的開閉，特別適合自動化程度高的閉路系統。帶信號電磁閥參照各系列電磁閥中的特點應用，能反映電磁閥是處于開啟或關閉狀態。

 

進口帶信號反饋電磁閥工作原理：

常閉——當線圈通電時，先導閥芯吸合，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開。

當線圈斷電時，先導閥芯靠彈簧復位，先導孔關閉，閥上腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。

常開——當線圈通電時，先導閥芯靠彈簧復位，先導孔關閉，閥上腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。

當線圈斷電時，先導閥芯靠彈簧復位，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開。

信號反饋—— 當電磁閥打開時，信號公共線和開信號線接通； 當電磁閥關閉時，信號公共線和關信號線接通。

Working principle of imported solenoid valve with signal feedback:
Normally closed - when the coil is energized, the pilot valve core is closed, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.
When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.
Normally open - when the coil is energized, the pilot valve core is reset by the spring, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.
When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.
Signal feedback: when the solenoid valve is opened, the signal common line and the on signal line are connected; when the solenoid valve is closed, the signal common line and the off signal line are connected.
 

進口帶信號反饋電磁閥描述：

德國《DE LOCKE》洛克進口帶信號反饋電磁閥，電磁閥里有密閉的腔，在不同位置開有通孔，每個孔都通向不同的油管，腔中間是閥，兩面是兩塊電磁鐵，哪面的磁鐵線圈通電閥體就會被吸引到哪邊，通過控制閥體的移動來檔住或漏出不同的排油的孔，而進油孔是常開的，液壓油就會進入不同的排油管，然后通過油的壓力來推動油缸的活塞，活塞又帶動活塞桿，活塞桿帶動機械裝置動。

Description of inlet solenoid valve with signal feedback:
German de There is a signal feedback solenoid valve at the inlet of lock. There are closed cavities in the solenoid valve, and through holes are opened at different positions. Each hole leads to different oil pipes. There is a valve in the middle of the cavity and two electromagnets on both sides. The valve body will be attracted to which side when the magnet coil is electrified. The movement of the valve body will be controlled to block or leak different oil drainage holes, and the oil inlet hole is normally open, which is liquid The pressure oil will enter different oil discharge pipes, and then push the piston of the oil cylinder through the pressure of the oil. The piston drives the piston rod, and the piston rod drives the mechanical device.
 

進口帶信號反饋電磁閥技術參數：

1、型號規格：DN15～DN500；

2、適用壓力：0.02～15Mpa；

3、適用介質：氣、水、油；

4、介質溫度：-20～+100℃；

5、環境溫度: 0～65℃；

6介質粘度：小于５０ＣＳt（大于時需定制）；

7、防護性能：防水、防爆；

8、防爆標志：ExdⅡ；

9、閥門材質：304、鑄鐵；

10、控制方式：常開、常閉；

11、電源電壓：DC12～127V AC24～380V；

12、連接方式：內螺紋、外螺紋、法蘭；

13、泄 漏 量：零；

Technical parameters of imported solenoid valve with signal feedback:
1. Model and specification: DN 15 ～ DN 500;
2. Applicable pressure: 0.02 ~ 15MPa;
3. Applicable media: gas, water and oil;
4. Medium temperature: - 20 ～ + 100 ℃;
5. Ambient temperature: 0 ~ 65 ℃;
6 medium viscosity: less than 50cst (need to be customized when it is larger than 50cst);
7. Protection performance: waterproof, explosion-proof;
8. Explosion proof sign: Exd Ⅱ;
9. Valve material: 304, cast iron;
10. Control mode: normally open, normally closed;
11. Power supply voltage: DC12 ~ 127V AC24 ~ 380V;
12. Connection mode: internal thread, external thread, flange;
13. Leakage: zero;
 

進口帶信號反饋電磁閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!