進口偏心半球閥德國洛克品牌外觀精美

 

進口偏心半球閥結構特點：

1、偏心半球閥其結構采用偏心契緊原理通過傳動機構達到閘緊、調節、關閉的目的，密封副是金屬面環帶硬面接觸密封，雙偏心結構在開啟時閥芯位于藏球室內，流通截面大，且閥門不被沖刷，關閉時閥芯不被沖刷，開啟時閥芯球面沿閥座漸進，有效地切除結垢障礙，實現可靠密封。它對兩相混流易結垢固體析出的混流輸送特別有效；

2、閥門的半球用雙金屬，母材上堆焊不同的合金，閥座也作相應堆焊經特殊的處理，密封面組合成防腐、耐磨、高強度等各種類型，滿足不同場合需求；

3、密封嚴密、輸送有害氣體可達零泄露；

4、密封副的閥芯留有補償量、當閥做磨損后，關閉時再轉動少許，任能可靠密封，延長了使用壽命。此外，用戶將壓緊螺母擰掉，調整或更換后閥座仍可用，避免了閥門密封失效后，整臺報廢的弊端；

 

因堆焊不同合金（或組合球）雙金屬密封副的選配可以用于耐磨、耐腐蝕、耐高溫且要求嚴格密封的工況。

進口偏心半球閥規格參數：

1.公稱通徑:    1"~64"（DN25~1600mm）

2.壓力等級:    Class150LB~900LB

3.適用溫度:    -40℃~425℃

4.連接方式:    對夾式,法蘭，焊接

5.閥體材質:    WCB，304,304L,316,316L，WC6，WC9等

6.操作方式:    手動，電動，氣動等

7.密封結構:    軟密封，硬密封

8.適用介質:    水、氣體、油品、蒸汽、液體、顆粒固體等

Specification parameters of inlet eccentric hemispherical valve:
1. nominal diameter: 1 "~64" (dn25-1600mm)
2. pressure class: class150lb-900lb
3. applicable temperature: 40 ℃ ~425 ℃
4. connection mode: wafer type, flange, welding
5. valve body material: WCB, 304304L, 316316L, wc6, wc9, etc
6. operation mode: manual, electric, pneumatic, etc
7. sealing structure: soft seal and hard seal
8. applicable medium: water, gas, oil, steam, liquid, particle solid, etc
 

進口偏心半球閥工作原理：

偏心半球閥由閥桿帶動球體繞旋轉中心A轉動時，球體由B點移到C點，此時相對閥門中心O，從B到C的軌跡為一凸輪狀偏心，向下進入閥座使閥門關閉保持密封。該閥由于存在上述凸輪原理，閥門關閉件從開啟到關閉過程中，作用在閥座上的力逐漸增加，即關閉件表面與閥座由完全脫離至接觸，并逐漸增大密封比壓，直至完全密封，反之亦然。這就大大改善了以往球閥的密封狀態和密封效果，適合高溫高壓及易結晶磨損嚴重的場合使用。

Working principle of inlet eccentric hemispherical valve:
When the eccentric hemispherical valve is driven by the stem to rotate around the rotating center a, the ball moves from point B to point C. at this time, the trajectory from B to C is cam eccentric, and enters the valve seat downward to keep the valve closed and sealed. Due to the above cam principle, the force acting on the valve seat increases gradually during the process of opening and closing of the valve closure part, that is, the surface of the valve closure part is completely separated from the valve seat to contact, and the sealing specific pressure is gradually increased until the valve is completely sealed, and vice versa. This greatly improves the sealing state and sealing effect of the ball valve in the past, and is suitable for high temperature and high pressure and easy to wear seriously.
 

進口偏心半球閥產品簡介：

德國洛克《DE LOCKE》進口雙偏心半球閥其結構采用偏心楔緊原理,通過傳動機構達到閘緊、調節、關閉的目的，密封副是金屬面環帶硬面接觸密封，雙偏心結構在開啟時閥芯位于藏球室內，流通截面大，且閥門不被沖刷，關閉時閥芯不被沖刷，開啟時閥芯球面沿閥座漸進，效地切除結垢障礙，實現可靠密封。它對兩相混流易結垢固體析出的混流輸送特別有效。

Introduction to imported eccentric hemispherical valve products:
The structure of double eccentric hemispherical valve imported by Locke de lock in Germany adopts the eccentric wedge principle, The purpose of closing, adjusting and closing is achieved by transmission mechanism. The sealing pair is metal face ring with hard surface contact seal. When the double eccentric structure is opened, the valve core is located in the ball chamber, with large circulation section and the valve is not scoured. When the valve is closed, the valve core is not washed out. When it is opened, the spherical surface of the valve core is gradually along the valve seat, thus effectively removing the fouling barrier to realize reliable sealing. It is very effective for the mixed flow transportation of two-phase mixed flow which is easy to precipitate the scaling solid.
 

進口偏心半球閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參

數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!