進口氣動截止閥德國洛克長期供應

 

進口氣動截止閥結構特點：

1、選材考究，符合國內、外相關標準，結構合理，造型美觀。

2、閥瓣、閥座密封面采用鐵基合金堆焊或司太立（Stellite）鈷基硬質合金堆焊而成，耐磨、耐高溫、耐腐蝕、抗擦傷性能好，使用壽命長。

4、閥桿經調質及表面氮化處理，有良好的抗腐蝕性和抗擦傷性。

5、可采用各種配管法蘭標準及法蘭密封面型式，滿足各種工程需要及用戶要求。

6、閥體材料品種齊全，填料、墊片可根據實際工況或用戶要求合理選配，能適用于各種壓力、溫度及介質工況。

7、倒密封采用螺紋連接密封座或本體堆焊奧氏體不銹鋼而成，密封可靠，更換填料可在不停機情況下進行，方便快捷，不影響系統運行。

                                                                                 

進口氣動截止閥規格參數：

1、公稱通徑：DN50-DN300

2、公稱壓力：PN16-PN40

3、使用溫度：-29～550℃（用于低溫系統時可選低溫截止閥）

4、閥體材質：碳鋼、不銹鋼

5、閥芯閥桿材質：2Cr13、304不銹鋼

6、傳動方式：氣動

7、連接方式：法蘭、焊接等

Pneumatic parameters: inlet stop valve specification:
1. Nominal diameter: dn50-dn300
2. Nominal pressure: pn16-pn40
3. Service temperature: - 29 ~ 550 ℃ (low temperature stop valve can be selected when used in low temperature system)
4. Body material: carbon steel, stainless steel
5. Valve core and stem material: 2Cr13, 304 stainless steel
6. Transmission mode: Pneumatic
7. Connection mode: flange, welding, etc
                                                                                    

進口氣動截止閥工作原理：

氣動截止閥利用壓縮空氣推動執行器內多組組合氣動活塞運動，傳力給橫梁和內曲線軌道的特性，帶動空芯主軸作旋轉運動，壓縮空氣氣盤輸至各缸，改變進出氣位置以改變主軸旋轉方向，根據負載截止閥所需旋轉扭矩的要求，可調整氣缸組合數目，帶動負載截止閥工作。

Working principle of inlet pneumatic stop valve:
The pneumatic stop valve uses compressed air to push multiple groups of combined pneumatic pistons in the actuator to move and transmit force to the crossbeam and inner curve track to drive the hollow spindle to rotate. The compressed air disk is sent to each cylinder to change the inlet and outlet position to change the rotation direction of the spindle. According to the requirements of the rotation torque required by the load stop valve, the number of cylinder combinations can be adjusted to drive the load stop valve The valve works.
                                                                               

進口氣動截止閥產品簡介：

進口氣動截止閥采用雙作用氣缸，利用上腔進氣或者下腔進氣來遠距離控制閥門，操作方便、靈活。氣缸使用介質：壓縮空氣，氮?dú)?。結構簡單、制造和維護方便;工作行程小，啟閉時間短;關閉體(閥瓣)與閥座密封面采用錐面密封，關閉力小，耐沖刷，密封可靠。閥座可為更換式閥座，可任意組合與關閉件密封面材料的配對，以滿足工況要求，延長使用壽命。

Introduction of imported pneumatic stop valve products:
The imported pneumatic cut-off valve adopts double acting cylinder, and uses the upper chamber air intake or lower chamber air intake to remotely control the valve, which is convenient and flexible to operate. Cylinder medium: compressed air, nitrogen. It has the advantages of simple structure, convenient manufacture and maintenance, small working stroke and short opening and closing time, and the sealing surface of the closing body (disc) and the valve seat is sealed with a conical surface, with small closing force, erosion resistance and reliable sealing. The valve seat can be a replaceable valve seat, which can be matched with the sealing surface material of the closing part at will, so as to meet the requirements of working conditions and prolong the service life.
                                                                               

進口氣動截止閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參

數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!