進口油用減壓閥德國洛克品牌品質保證

進口油用減壓閥結構特點：

◆調壓范圍：它是指減壓閥輸出壓力P2的可調范圍，在此范圍內要求達到規定的精度。調壓范圍主要與調壓彈簧的剛度有關。

◆壓力特性：它是指流量g為定值時，因輸入壓力波動而引起輸出壓力波動的特性。輸出壓力波動越小，減壓閥的特性越好。輸出壓力必須低于輸入壓力—定值才基本上不隨輸入壓力變化而變化。

◆流量特性：它是指輸入壓力—定時，輸出壓力隨輸出流量g的變化而變化的持性。當流量g發生變化時，輸出壓力的變化越小越好。一般輸出壓力越低，它隨輸出流量的變化波動就越小。

進口油用減壓閥規格參數：

1、尺寸范圍：DN15～DN600

2、壓力等級：1.6～16.0MPa

3、殼體材料：碳鋼、不銹鋼

4、適用介質：原油、石油、導熱油、等油品  

5、操作方式：自動  設計特色  內導式設計，無須外部零件和接管

6、不銹鋼膜片、硬化不銹鋼工作零件

7、有NPT螺紋和法蘭兩種連接

8、內導式減壓閥調節容量更大，精確度更高

9、調節比為20：1

Specification parameters of pressure reducing valve for imported oil:
1. Size range: DN 15 ～ DN 600
2. Pressure rating: 1.6 ～ 16.0mpa
3. Shell material: carbon steel, stainless steel
4. Applicable medium: crude oil, petroleum, heat transfer oil, etc
5. Operation mode: automatic design, internal guiding design, no need of external parts and connecting pipe
6. Stainless steel diaphragm, hardened stainless steel working parts
7. There are NPT thread and flange connection
8. The inner guide pressure reducing valve has larger regulating capacity and higher accuracy
9. The adjustment ratio is 20:1
 

進口油用減壓閥主要零件材料： 

零件名稱      零件材料

◆閥體閥蓋底蓋：WCB

◆閥座閥盤    ：2Cr13

◆缸套        ：2Cr13/銅合金

◆活塞        ：合金鑄鐵

◆導閥座導閥桿：2Cr13

◆主閥彈簧    ：1Cr18Ni9Ti

◆導閥主彈簧  ：50CrVA

◆調節彈簧    ： 60Si12Mn

Materials of main parts of pressure reducing valve for imported oil:
Part name part material
Body, cover and bottom cover: WCB
Seat disc: 2Cr13
Cylinder liner: 2Cr13 / copper alloy
Piston: alloy cast iron
Guide valve seat and guide valve stem: 2Cr13
Main valve spring: 1Cr18Ni9Ti
Main spring of pilot valve: 50CrVA
Adjusting spring: 60si12mn