進口圓盤式疏水閥德國洛克品牌產品圖片

進口圓盤式疏水閥結構特點：

體積小，重量輕，不受安裝位置的限制。

全部材質均為不銹鋼件，經久耐用，耐腐蝕。

在室外不怕冷凍，能耐水擊，耐過熱。

過冷度為 8 ℃ ，漏汽率小于實際排量 3% ，zui大背壓 50% 。

結構簡單，安裝維修方便。

進口圓盤式疏水閥規格參數：

A、閥體材料：WCB、304、316

B、閥門口徑：DN15-50MM

C、閥門壓力：PN16-PN63

D、連接標準：ASME B16.10、DIN2501

E、控制方式：自動

F、密封材料：304

G、工作溫度：-20℃至+450℃

Specifications and parameters of imported disc trap:
A. Body material: WCB, 304, 316
B. Valve diameter: DN 15-50 mm
C. Valve pressure: pn16-pn63
D. Connection standard: ASME B16.10, din2501
E. Control mode: automatic
F. Sealing material: 304
G. Working temperature: - 20 ℃ to + 450 ℃

進口圓盤式疏水閥工作原理：

圓盤式蒸汽疏水閥內有一個閥片，既是敏感件又是動作執行件。當裝置啟動時，管道出現冷卻凝結水，凝結水靠工作壓力推開閥片，迅速排放。當凝結水排放完畢，蒸汽進入疏水閥內，蒸汽的體積迅速擴大，蒸汽比凝結水的流速大，使閥片上下產生壓差，閥片在蒸汽流速的吸力下迅速關閉。當閥片關閉時，閥片受到兩面壓力，閥片下面的受力面積小于上面的受力面積，因疏水閥汽室里面的壓力來源于蒸汽壓力，所以閥片上面受力大于下面，閥片緊緊關閉。當疏水閥汽室里面的蒸汽降溫成凝結水，汽室里面的壓力消失。凝結水靠工作壓力推開閥片，凝結水又繼續排放，循環工作，間斷排水。

Working principle of imported disc type steam trap:
There is a valve plate in the disc steam trap, which is not only a sensitive part but also an action actuator. When the device is started, the cooling condensate appears in the pipeline, and the condensate is quickly discharged by pushing the valve plate open under the working pressure. When the condensate is discharged, the steam enters into the steam trap, the volume of steam expands rapidly, and the flow rate of steam is higher than that of condensate, which causes the pressure difference between the upper and lower parts of the valve plate, and the valve plate closes rapidly under the suction of steam flow rate. When the valve plate is closed, the valve plate is under pressure on both sides, and the stress area under the valve plate is less than that on the top. Because the pressure in the steam trap chamber comes from the steam pressure, the stress on the top of the valve plate is greater than that on the bottom, and the valve plate is closed tightly. When the steam in the steam trap chamber cools down to condensate, the pressure in the steam trap chamber disappears. When the valve plate is pushed open by the working pressure, the condensate will continue to discharge, circulate and discharge intermittently.
 

進口圓盤式疏水閥產品簡介：

德國洛克《DE LOCKE》進口圓盤式疏水閥用來自動排除蒸汽管道，用熱設備中產生的凝結水，以保證管道暢通，提高熱效率。本產品廣泛用于石油、化工、食品、印染、紡織、醫藥等行業的蒸汽管網中的蒸汽總管、支管、汽水分離器等場合，還可用于烘房、烘箱、熱壓機等用汽設備中。

Brief introduction of imported disc trap products:
The disc type steam trap imported from "de Locke" of Germany is used to automatically discharge the steam pipe and use the condensate generated in the thermal equipment to ensure the smooth flow of the pipe and improve the thermal efficiency. This product is widely used in petroleum, chemical, food, printing and dyeing, textile, pharmaceutical and other industries in the steam pipe network of steam main, branch, steam separator and other occasions, can also be used in drying room, oven, hot press and other steam equipment.