進口楔式閘閥德國洛克品牌產品詳情

 

進口楔式閘閥結構特點:

1、流動阻力小。閥體內部介質通道是直通的，介質成直線流動，流動阻力小。

2、啟閉時較省力。是與截止閥相比而言，因?yàn)闊o論是開或閉，閘板運動方向均與介質流動方 向相垂直。

3、高度大，啟閉時間長。閘板的啟閉行程較大，降是通過螺桿進行的。

4、水錘現象不易產生。原因是關閉時間長。

5、介質可向兩側任意方向流動，易于安裝。閘閥通道兩側是對稱的。

6、結構長度(系殼體兩連接端面之間的距離)較小。

7、密封面易磨損，影響使用壽命。啟閉時，閘板與閥座兩個密封面相互摩擦滑動，要介質壓力作用下易產生擦傷磨損，影響密封性能，縮短使用壽命。

8、價格較貴。接觸密封面較多，加工較復雜，特別是閘板座上的密封面不易加工，而且零件較多。

9、形體簡單 , 結構長度短，制造工藝性好，適用范圍廣。

10、結構緊湊，閥門剛性好，通道流暢，流阻數小，密封面采用不銹鋼和硬質合金，使用壽命長，采用PTFE填料．密封可靠．操作輕便靈活．

                                                                                 

進口楔式閘閥的缺點：

(1) 密封面易損傷

啟閉時閘板與閥座相接觸的兩密封而之間有相對摩擦，易損傷，影響密封件能與使用壽命，維修比較困難。

(2) 啟閉時間長，高度大

由于閘閥啟閉時須全開或全關，閘板行程大，開啟用要一定的空間，外形尺寸高，安裝所需空間較大。

(3) 結構復雜

閘閥一般都有兩個密封面，給加工、研磨和維修增加一些，困難零件較多，制造與維修較困難，成本比截止閥高

                                                                                    

進口楔式閘閥工作原理：

1.本閥為楔式閘板閥，主要由閥體、閥座、閘板、閥桿、閥蓋、閥桿螺母、密封填料等零部件組成。

2.閥門的閥板、閥座、閥桿、填料墊采用不繡鋼制造而成，能滿足技術規范所明確的工況要求。

3.閥門的閥座采用浮動形式，能保證閥座與閘板的有效密封，閥座表面經淬火處理，其表面硬度值為45～50HRC，從而具備了抗沖蝕、耐磨損的特點，可有效保證產品的使用壽命。

4.閥門密封填料采用聚四氟乙烯材料，能保持常壓及高壓的正常密封。

5.逆時針方向旋轉手輪，閥門運行打開動作，當閥桿進入上密封時，閘板導流孔與閥座孔完全接通，此時閥門完全打開；順時針方向旋轉手輪，閥門運行關閉動作，當關閉到位后，實現密封副的密封。

Working principle of imported wedge gate valve:
1. The valve is wedge gate valve, which is mainly composed of valve body, valve seat, gate, valve stem, valve cover, valve stem nut, sealing packing and other parts.
2. The valve plate, valve seat, valve stem and packing pad are made of stainless steel, which can meet the working conditions specified in the technical specifications.
3. The valve seat adopts floating form, which can ensure the effective sealing between the valve seat and the gate. The surface hardness of the valve seat is 45 ~ 50HRC after quenching treatment, so it has the characteristics of anti erosion and wear resistance, which can effectively guarantee the service life of the product.
4. The valve packing is made of polytetrafluoroethylene, which can keep normal sealing under normal pressure and high pressure.
5. Rotate the hand wheel anticlockwise to open the valve. When the valve stem enters the upper seal, the gate guide hole and the valve seat hole are fully connected, and the valve is fully opened. Rotate the hand wheel clockwise to close the valve. When the valve is closed in place, the seal pair is sealed.
                                                                               

進口楔式閘閥應用范圍：

楔式閘閥廣泛適用于石油化工，火力發電廠等油品、水蒸氣管路上作接通或截?cái)喙苈分薪橘|(zhì)的啟閉裝置。

在各種類型的閥門中，閘閥是應用最廣泛的一種。它一般只適用于全開或全閉，不能作調節和節流使用。

楔式閘閥一般用在對閥門的外形尺寸沒有嚴格要求,而且使用條件又比較苛刻的場合。如高溫高壓的工作介質，要求關閉件要保證長期密封的情況下等。

通常，使用條件或要求密封性能可靠，高壓，高壓截止（壓差大）、低壓截止（壓差小），低噪聲、有氣穴和汽化現象、高溫介質、低溫（深冷）時，推薦使用楔式閘閥。如電力工業、石油煉制、石油化工、海洋石油、城市建設中的自來水工程和污水處理工程，化工等領域中應用較多。

Application scope of imported wedge gate valve:
Wedge gate valve is widely used in petrochemical, thermal power plants and other oil products, steam pipelines for connecting or cutting off the medium in the pipeline opening and closing device.
In various types of valves, gate valve is the most widely used one. Generally, it is only suitable for full opening or full closing, and cannot be used for adjustment and throttling.
Wedge gate valve is generally used in the occasions where there are no strict requirements on the overall dimensions of the valve and the service conditions are relatively harsh. Such as high temperature and high pressure working medium, the closing parts are required to ensure long-term sealing.
Generally, wedge gate valve is recommended for reliable sealing performance, high pressure, high pressure cut-off (large differential pressure), low pressure cut-off (small differential pressure), low noise, cavitation and vaporization, high temperature medium and low temperature (cryogenic). Such as power industry, petroleum refining, petrochemical industry, offshore oil, water engineering and sewage treatment engineering in urban construction, chemical industry and other fields.