進口襯氟閘閥德國洛克品牌產品參數

進口襯氟閘閥結構特點:

1、產品連接較少，整體剛性好。

2、截流速度快。

3、開度限位機構方便、靈活、精確。

4、體型小巧，外形美觀。

5、操作簡單、省力、維修方便。

6、流體阻力小，密封面受介質的沖蝕小。

7、容易更換易損件。

進口襯氟閘閥規格參數：

公稱通徑：DN15-DN500

公稱壓力：1.6Mpa-4.0Mpa

適用溫度：-30℃～200℃

適用介質：鹽酸、硝酸、氫氟酸、*、硫酸、王水等強腐蝕性介質

閥體材質：鑄鐵、鑄鋼、碳鋼

連接方式：法蘭連接

設計制造：HG/T 3704；GB/T 12234；API 60

結構長度：HG/T 3704；GB/T 12221；ASMEB16.10

法蘭標準：HG/T 20592；GB/T 9119；ASME B16.5；JIS B2220

檢查試驗：G8/T 13927；J8/T 9092；API 598

進口襯氟閘閥安裝事項:

手輪、手柄及傳動機構均不允許作起吊用，并嚴禁碰撞。雙閘板閘閥應垂直安裝（即閥桿處于垂直位置 , 手輪在頂部 )。帶有旁通閥的閘閥在開啟前應先打開旁通閥（以平衡進出口的壓差及減小開啟力 )。帶傳動機構的閘閥，按產品使用說明書的規定安裝。如果閥門經常開關使用 , 每月至少潤滑一次。

Installation of imported fluorine lined gate valve:
Hand wheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is strictly prohibited. The double gate valve should be installed vertically (i.e. the stem is in the vertical position and the hand wheel is at the top). The gate valve with bypass valve should be opened before opening (to balance the pressure difference between the inlet and outlet and reduce the opening force). The gate valve with transmission mechanism shall be installed according to the product manual. If the valve is used frequently, lubricate it at least once a month.
                                                                               

進口襯氟閘閥產品簡介:

德國洛克《DE LOKE》進口襯氟閘閥是而腐蝕管道中一種常用的截?cái)嚅y，閘板隨閥桿一起作直線運動，優秀的結構解決了因顆粒、釬維狀的介質沉積在螺桿槽內而引起的操作不便或卡死等現象。

Introduction of imported fluorine lined gate valve products:
The fluorine lined gate valve imported from German rock "de loke" is a kind of commonly used cut-off valve in corroded pipeline. The gate moves in a straight line with the valve stem. The excellent structure solves the inconvenient operation or stuck phenomenon caused by the deposition of particles and rod-shaped medium in the screw groove.