進口低溫閘閥產品特點-德國洛克

進口低溫閘閥結構特點：

1、低溫閘閥不銹鋼部件的制造過程應按照粗加工、深冷處理(至少兩次)、精加工、研磨及無塵裝配的工藝流程進行。

2、粗加工前，要求進行常溫拉伸試驗、彎曲試驗以及低溫沖擊試驗，還應進行硬度檢測、金相分析等。

3、精加工前至少對材料進行兩次深冷處理，以減少閥門在低溫條件下尺寸的改變，降低溫度對密封性能的影響。低溫處理溫度應低于材料相變溫度且低于閥門實際工作溫度。要求深冷處理時間1～2h，取出自然冷卻到常溫，重復循環2次。

4、每個零部件要求進行超聲波清洗、表面脫脂或脫油，裝配后的閥門要求內腔及外表面足夠清潔。

進口低溫閘閥規格參數：

公稱通徑：15～600mm 

壓力等級：ANSI Class 150~4500LB

適用溫度：-196℃～-46℃

連接方式：法蘭式、焊接式、螺紋

閥體材質：304、304L、316、316等 

適用介質：LNG、液氧、液氮等

驅動方式：手動、電動、氣動等

進口低溫閘閥工作原理：

1、為防止中腔異常升壓，在閘板的進口側設置了泄壓孔

2、根據閥門的工作溫度確定閥蓋的頂部長度，確保閥桿填料的可靠密封

3、根據工作溫度合理選用填料，墊片等零件的材料

4、嚴格控制材料的化學成份及低溫沖擊韌性等力學性能指標

5、采用多種配管法蘭標準及密封面型式，適用于各種工程需要

Working principle of imported low temperature gate valve:
1. In order to prevent abnormal pressure rise in the middle chamber, a pressure relief hole is set at the inlet side of the ram
2. Determine the top length of the valve cover according to the working temperature of the valve to ensure the reliable sealing of the stem packing
3. According to the working temperature, reasonable selection of packing, gasket and other parts of the material
4. Strictly control the chemical composition and low temperature impact toughness of materials
5. It adopts a variety of piping flange standards and sealing surface types, suitable for various engineering needs
                                                                               

進口低溫閘閥產品簡介：

德國洛克《DE LOCKE》進口低溫閘閥以獨特的加長型閥桿為基礎點，采用深冷不銹鋼為主體材料，完全避免使用過程中密封變形泄露,浸漬聚四氟乙烯為密封材料,有自潤滑性用作，具有開關靈活、密封可靠的特點。

Introduction of imported low temperature gate valve products:
Germany Locke "de Locke" imported low-temperature gate valve is based on the unique lengthened stem, using cryogenic stainless steel as the main material, completely avoiding the sealing deformation and leakage in the process of use. The impregnated polytetrafluoroethylene is used as the sealing material, which has the characteristics of self-lubricating, flexible switch and reliable sealing.