進口電動高壓調節閥德國洛克品質保證

 

一、進口電動高壓調節閥技術參數：

閥體形式 直通鑄造球型閥

公稱通徑 DN15～200mm

公稱壓力 PN1.6～6.4MPa

法蘭標準 GB/T9113、 JB/T79

連接形式 法蘭(FF RF RTJ)、焊接(SW BW)、螺紋(適用于1″以內)

閥蓋形式 標準型-17～+230℃、高溫型+230～+450℃

壓蓋型式 螺栓壓緊式

密封填料 V型聚四氟乙烯填料、含浸聚四氟乙烯石棉填料、石棉紡織填料、石墨填料

 

執行器技術參數

電源電壓         220V/50Hz

輸入信號         4-20mA或1-5V·DC

輸出信號         4-20mA·DC

防護等級         IP55

隔爆標志         ExdⅡBT4

手操功能         手柄

環境溫度         -25～+70℃

環境濕度         ≤95%

溫包、毛細管材料 H62、1Cr18Ni9Ti

毛細管長度         3米、5米、10米

溫度控制范圍     0~250℃

設定值偏差         ±2℃

 

進口電動高壓調節閥主要特點：

1．本系列產品采用完合拆裝式結構，操作力距小，閥腔內件（包括閥座、閥芯、節流組件、密封件等）均可從并閥腔取出，維護保養十分方便，閥體不需從管道上割下，可長期使用。

2．閥芯為柱塞體平衡式結構，操作力距小，調節靈敏高。

3．節流組件由多孔板集流式節流環與套筒式節流套組成，且配以均流罩，因此具有小流量高壓差無氣蝕、大流量、調節性能好，流體排出梳流無噪音的綜合特性，完全滿足了高壓差等苛刻工況的要求，有效地實現了高溫、高壓差流體的流量調節控制，可調性好，調節精度高。

4．節流環可在閥門工作行程的55%之內，實現多級減壓節流

5．閥芯和閥座密封面堆焊司鈦萊硬質合金，抗沖刷、耐蝕。

Main features of imported electric high pressure regulating valve:
1. the series of products adopt the complete disassembly and disassembly structure, with small operating force distance. The valve cavity parts (including valve seat, valve core, throttle assembly, seal, etc.) can be taken out of the parallel valve cavity. The maintenance is very convenient. The valve body does not need to be cut off from the pipe and can be used for a long time.
2. the valve core is a balanced structure of plunger body, with small operating force distance and high sensitivity.
3. the throttle assembly is composed of a perforated plate collector type throttle ring and a sleeve type throttle sleeve, and is equipped with a uniform flow cover. Therefore, it has the comprehensive characteristics of low flow high pressure difference, no cavitation, high flow and good regulation performance, and no noise in the flow discharge comb flow. It completely meets the requirements of the harsh working conditions such as high pressure difference, and effectively realizes the flow regulation control of high temperature and high pressure differential fluid, which has good adjustability and adjustment The accuracy of the section is high.
4. the throttle ring can realize multi-stage pressure reduction and throttling within 55% of the valve working stroke
5. the valve core and seat sealing surface are overlaid with titanium carbide, which is anti scour and corrosion resistant.
 

進口電動高壓調節閥描述：

德國DE LOCKE洛克進口電動高壓調節閥，由PSL系列或者DE LOCKE系列直行程電動執行機構和高壓調節閥體組成。電動籠式高壓調節閥是針對調節閥在高壓或高壓差、有嚴重汽蝕、沖蝕的嚴酷工況條件下壽命短、閥桿易斷裂、襯套易脫落嚴重問題研制開發的產品。電動高壓調節閥采用籠式節流形式來分?jǐn)倝翰?，減少了氣蝕、沖蝕、撓流破壞，大大提高了調節閥的使用壽命，特別是用在尿素系統中比普通高壓閥壽命提高2-3倍。

電動執行機構為一體化結構，內有伺服放大器,輸入控制信號(4～20mADC或1～5VDC)及電源即可控制閥門開度，達到對壓力、流量、液位、溫度等工參數的調節。閥體為直通式，閥芯為單導向結構，閥體流路簡單，阻力小，電動高壓調節閥特別適用于高粘度，含有懸浮物和顆粒狀介質流體的調節，可避免結焦、粘結、堵塞。電動高壓調節閥整體具有動作靈敏、連線簡單、流量大、體積小、調節精度高等特點。

Description of inlet electric high pressure regulating valve:
The electric high pressure regulating valve imported by de lock lock in Germany is composed of PSL series or de lock series direct stroke electric actuator and high-pressure regulating valve body. Electric cage type high pressure regulating valve is a product developed for the control valve with short life, easy fracture of stem and serious problem of bushing falling off under the harsh condition of high pressure or high pressure difference, severe cavitation and erosion. The electric high pressure regulating valve adopts cage type throttle to share the pressure difference, which reduces the damage of cavitation, erosion and deflection flow, greatly improves the service life of the regulating valve, especially in urea system, which is 2-3 times longer than that of the ordinary high-pressure valve.
The electric actuator is an integrated structure, with servo amplifier. Input control signal (4-20madc or 1-5vdc) and power supply can control the valve opening, and achieve the adjustment of pressure, flow, liquid level, temperature and other working parameters. The valve body is straight through type, the valve core is single guiding structure, the valve body flow path is simple, the resistance is small, the electric high-pressure regulating valve is especially suitable for the high viscosity, containing the suspension and granular medium fluid adjustment, which can avoid coking, bonding and blocking. The electric high pressure regulating valve has the characteristics of sensitive action, simple connection, large flow, small volume and high precision.