進口低溫蝶閥德國洛克品牌產品參數

進口低溫蝶閥結構特點：

1 基于低溫介質易燃易爆的特性，低溫蝶閥設計了防火防靜電的措施。

2 對于溫度高于-50℃,一般不采用長頸結構，對于溫度低于-50℃的蝶閥，頸部采用長頸結構。

3 低溫蝶閥適用于低溫液體貯運設備的管理系統，具有開關靈活、密封可靠的特點，也可用于其他低溫和深冷介質的管理系統。

進口低溫蝶閥規格參數：

公稱通徑 DN50～DN500(MM)

公稱壓力 PN0.6、1.0、1.6MPa

連接方式 對夾式、法蘭

驅動形式 電源驅動AC220V、AC380V、DC24V(其它特制)

適用溫度 -40℃～196℃

閥體材質 CF8、CF8M、CF3M

密封材質 PEFE、PPL、304、316

控制形式 開關型（開關兩位控制）、調節型（定位器4-20mA模擬量控制）

進口低溫蝶閥產品優勢

1. 轉動靈活方便

2. 緊密的金屬密封系統

3. 長壽命閥座。通過消除閥座和閥盤密封之間的干擾，可防止閥座和密封破損

4.金屬環閥座，自我溫度調節

5. 材料選擇范圍廣，包括能抵抗腐蝕的先進合金

6. 防火測試達到API607標準

7.耐低溫,-425℉下零泄露

8.閥體符合ASME和MSS標準

閥軸符合API607標準

9.無干擾，卡死閥座設計

10. 優越的流量控制特性

11. 閥座密封緊密

12. 零泄露－雙向密封 確保緊閉密封

Advantages of imported low temperature butterfly valve
1. Flexible and convenient rotation
2. Tight metal sealing system
3. Long life valve seat. By eliminating the interference between the seat and disc seal, the damage of the seat and seal can be prevented
4. Metal ring seat, self temperature adjustment
5. Wide selection of materials, including advanced alloys that can resist corrosion
6. The fire test meets API 607 standard
7. Low temperature resistance, zero leakage at - 425 ℃
8. The valve body conforms to ASME and MSS standards
The anti stripping valve shaft meets API 607 standard
9. No interference, stuck seat design
10. Excellent flow control characteristics
11. The valve seat is tightly sealed
12. Zero leakage - two way seal ensures tight seal

進口低溫蝶閥產品簡介：

德國洛克《DE LOCKE》進口低溫蝶閥專用結構避免閥門泄漏閥門產生內漏主要原因是密封副在低溫狀態下產生變形所致當介質溫度下降到使材料產生相變時造成體積變化，使原本研磨精度很高的密封面產生翹曲變形而造成低溫密封不良。進口低溫蝶閥把常規的平面密封改為錐面密封。閥座是一個斜圓錐橢圓密封面，與嵌裝在蝶板上的正圓形彈性密封環組成密封副。密封環可在蝶板槽內徑向浮動。

當閥門關閉時，彈性密封環首先和橢圓密封面的短軸接觸，隨著閥桿的轉動逐漸將密封環向內推，迫使彈性環再和斜圓錐面的長軸接觸，最終導致彈性密封環與橢圓密封面全部接觸。它的密封是依靠彈性環產生變形而達到的。因此當閥體或蝶板在低溫下產生變形時，都會被彈性密封環來吸收補償，不會產生泄漏和卡死現象。當閥門打開時這一彈性變形立即消失，在啟閉過程中基本沒有相對磨擦，故使用壽命長。

Introduction of imported low temperature butterfly valve products:
The special structure of low temperature butterfly valve imported from German Locke "de Locke" can avoid valve leakage. The main reason for valve internal leakage is that the sealing pair is deformed at low temperature. When the medium temperature drops to phase change, the volume changes, and the sealing surface with high grinding accuracy warps and deforms, resulting in poor low temperature sealing. The imported low temperature butterfly valve changes the conventional plane seal to the cone seal. The valve seat is an oblique conical elliptical sealing surface, which forms a sealing pair with a round elastic sealing ring embedded on the butterfly plate. The sealing ring can float in the inner diameter of butterfly plate groove.
When the valve is closed, the elastic sealing ring first contacts the short axis of the elliptical sealing surface, and gradually pushes the sealing ring inward with the rotation of the valve stem, forcing the elastic ring to contact the long axis of the inclined conical surface again, eventually leading to all contact between the elastic sealing ring and the elliptical sealing surface. Its sealing is achieved by the deformation of the elastic ring. Therefore, when the valve body or butterfly plate deforms at low temperature, it will be absorbed and compensated by the elastic sealing ring, and there will be no leakage and stuck phenomenon. When the valve is opened, the elastic deformation disappears immediately, and there is basically no relative friction in the process of opening and closing, so the service life is long.