進口高壓焊接式過濾器德國洛克品牌精工細作

進口高壓焊接式過濾器性能范圍：

公稱通徑：DN3-50mm

公稱壓力：PN16~PN50Mpa

閥體材料：304/316不銹鋼

濾網濾框：不銹鋼

過濾精度：10-300（目/in）

適用溫度：-20℃～+120℃ -70℃～180℃等

密封材質：耐油石棉、丁睛橡膠、F4

連接方法：法蘭、卡套、螺紋、對焊

制造材料：20#﹑1Cr18Ni9Ti﹑304﹑316﹑316L﹑12Cr1Mov等

進口高壓焊接式過濾器產品特點： 

主體均采用高壓沖擊鍛打，殼體強化處理，耐壓可達80MPa?？赡透邏?，耐高溫，耐腐蝕，質量可靠，使用壽命長。

進口高壓焊接式過濾器產品概述：

德國《DE LOCKE》洛克進口高壓焊接式過濾器是輸送介質管道上不可缺少的一種裝置，通常安裝在減壓閥、泄壓閥、定水位閥或其它設備的進口端，用來消除介質中的雜質，防止顆粒性雜質進入通道，造成堵塞，使閥門或其他設備失靈而不能正常使用，以保護閥門及設備的正常使用。當流體進入置有一定規格濾網的濾筒后，其雜質被阻擋，而清潔的濾液則由過濾器出口排出，當需要清洗時，只要將可拆卸的濾筒取出，處理后重新裝入即可，因此，使用維護較為方便。

Introduction of imported high pressure welded filter products:
German de Locke imported high-pressure welded filter is an indispensable device in the medium pipeline. It is usually installed at the inlet end of the pressure reducing valve, pressure relief valve, constant water level valve or other equipment to eliminate the impurities in the medium, prevent the particulate impurities from entering the channel, cause blockage, and make the valve or other equipment out of order, so as to protect the positive operation of the valve and equipment Often used. When the fluid enters the filter cartridge with a certain size of filter screen, its impurities are blocked, and the clean filtrate is discharged from the outlet of the filter. When cleaning is needed, the detachable filter cartridge can be taken out and re loaded after treatment. Therefore, the use and maintenance is more convenient.