
進口氣動隔膜調節閥工作穩定可靠-德國洛克
價格
訂貨量(臺)
¥2800.00
≥1
店鋪主推品 熱銷潛力款
㠗㠙㠚㠒㠕㠗㠚㠓㠘㠚㠓
在線客服

萊恩泵閥制造(珠海)有限公司
店齡5年
企業認證
聯系人
葉工
聯系電話
㠗㠙㠚㠒㠕㠗㠚㠓㠘㠚㠓
經營模式
生產商,
所在地區
廣東省珠海市
進口氣動隔膜調節閥工作穩定可靠-德國洛克
一、進口氣動隔膜調節閥技術參數:
公稱通徑 | DN15-200mm | |
公稱壓力 | PN0.6-16.0Mpa | |
行程mm | 10 16 25 40 60 | |
流量特性 | 近似快開型 | |
介質溫度 | -15℃~200℃(常溫型)、-40℃~+250℃、-40℃~+450℃(中溫型)、-100℃~+200℃(低溫型) | |
法蘭形式 | 法蘭密封面形式按JB77,其中鑄鐵法蘭按光滑式,鑄鋼法蘭按凹式 | |
可調比R | 30:1 | |
氣源接頭 | M16×1.5 | |
不帶定位器 | ||
基本誤差 | ±10% | |
回 差 | 8% | |
死 區 | 6% | |
可配附件 | 電氣定位器或電/氣轉換器 空氣過濾減壓器 電磁閥 手輪機構等 | |
額定流量系數Kv偏差 | ±20 % | |
帶定位器 | ||
基本誤差 | 1.5% | |
回 差 | 1.5% | |
死 區 | 0.6% | |
允許泄漏量 | 10-4×閥額定容量 | |
5×10-6×閥額定容量 | ||
可配附件 | 電氣定位器或電/氣轉換器 空氣過濾減壓器 電磁閥 手輪機構等 | |
額定流量系數Kv偏差 | ±20% |
二、進口氣動隔膜調節閥主要特點:
采用多彈簧執行機構,高度及重量均可減小30%。
閥體內表面有多種材料涂復層,避免介質直接接觸,承受強閥腐蝕性介質的腐蝕。閥門關閉時,內、外泄漏量為零,特別適合于劇毒介質或不允許污染介質的閥節。流路簡單,阻力小,額定流量系數比同口徑單座,套筒調節閥大。
三、進口氣動隔膜調節閥描述:
德國DE LOCKE洛克進口氣動隔膜調節閥由DE LOCKE多彈簧氣動薄膜執行機構和隔膜閥組成。氣動隔膜調節閥隔膜閥體流通平滑、節流元件為彈性隔膜閥,閥蓋上無填料函。因而閥流通能力比一般調節閥大且無泄漏,在許用壓差范圍內可作切斷閥用。氣開、氣關作用由正反執行機構實現。氣動薄膜隔膜調節閥適用于高粘性流體、懸浮狀顆粒、纖維介質和有毒介質、腐蝕性介質的調節場合。
Introduction of imported pneumatic control butterfly valve products:
German de Locke imported pneumatic control butterfly valve is composed of piston type double acting or single acting (spring return) pneumatic actuator and butterfly valve. It is a kind of rotary high-performance regulating or shut-off valve. It is equipped with electro-pneumatic valve positioner or solenoid valve, air filter pressure reducer and limit switch (valve position feedback), which can realize the proportional regulation and two position shut-off of fluid medium in process pipeline Control, so as to achieve the flow of fluid media, pressure, temperature, liquid level and other parameters of automatic control. It is widely used in gas, turbid liquid, concentrated slurry or ash powder, suspended particles and other media.
