其他定制尺寸，請聯系客服

預制集水槽模具在生產過程中可能會遇到種種問題，其中大的一個就是生產塑料模具的速度快，生產之后沒有任何的固定措施，因?yàn)樗芰系臒釢q冷縮性，導致剛生產出來的塑料模具在冷固凝確后特別容易變形，所以好在每個塑料模具生產后，馬上用特質的鐵架，或者叫凝固架固定在模具上，這樣生產的塑料模具就不易變形，而且生產出來的模具也特別美觀，一看上去就特別筆直，沒有彎曲的地方，這個問題必須引起注意，好多塑料模具特別容易變形，不是說生產廠家的問題，而是塑料本身固有的特性，很多廠家都沒注意到，所以才導致變形問題的出現。預制集水槽模具未來的發展道路如何呢？下面我來淺談一下，首先就是生產路邊石塑料模具的兩個必備設施，注塑機和胎具，隨著市場要求的不斷提高，注塑機型號也隨之越來越大，現在大的注塑機一般能到50000g，大型注塑機生產出來的塑料模具效果就是比小型注塑機生產出來的好，表面光潔不易變形，注塑機的選擇一般也是比較重要的，我廠的注塑機都是從德國進口來的，質量保證，下面就是胎具的創新和提高，預制集水槽模具如何使用更長久，胎具上的創新必備，首先就是加強筋的使用，四周、底部的加強筋的使用應用到各類預制集水槽模具上，除此之外，預制集水槽模具的壁厚也是創新之一，客戶要求使用次數多就是為了節省制作水泥預制件的成本，所以在路邊石塑料模具加強筋、壁厚的問題上，我廠特別重視。Various problems may be encountered during the production of prefabricated water collecting tank molds. One of the major problems is that the production of plastic molds is fast, and there are no fixed measures after production. Because of the thermal expansion and cold contraction of plastics, the newly produced plastic molds are particularly easy to deform after cold solidification, so it is good that special iron frames are used immediately after the production of each plastic mold, Or the solidification frame is fixed on the mold, so that the plastic mold produced is not easy to deform, and the mold produced is particularly beautiful. It looks very straight without bending. This problem must be paid attention to. Many plastic molds are particularly easy to deform, not the problem of the manufacturer, but the inherent characteristics of the plastic itself, Many manufacturers did not notice, which led to the deformation problem. What is the future development path of prefabricated water collecting tank mould? Next, let me talk about the two necessary facilities for the production of roadside stone plastic molds, injection molding machine and mould. With the continuous improvement of market requirements, the model of injection molding machine is becoming larger and larger. Now large injection molding machines can generally reach 50000 g. the effect of plastic molds produced by large injection molding machines is better than that produced by small injection molding machines. The surface is smooth and not easy to deform, The selection of injection molding machines is generally more important. The injection molding machines of our factory are imported from Germany with quality assurance. The following is the innovation and improvement of the mold, how to use the prefabricated water collecting tank mold for a longer time, and the innovation on the mold is necessary. The first is the use of stiffeners. The stiffeners around and at the bottom are applied to all kinds of prefabricated water collecting tank molds. In addition, The wall thickness of the prefabricated water collecting tank mold is also one of the innovations. The customer requires more times of use in order to save the cost of making cement prefabricated parts. Therefore, our factory pays special attention to the stiffener and wall thickness of the roadside stone plastic mold.