宏旭—地界碑模具—公路地界碑塑料模具

地界碑模具使用方法：在地界碑模具的制造過程中要加強檢驗，把檢驗的重點放在尺寸精度上。雖然是在選定成型材料、成型設備時，在預想的工藝條件下進行界碑模具設計，但是人們的認識往往是不完善的，因此必須在界碑模具加工完成以后，進行試模試驗，看成型的制件質量如何。發現總是以后，進行排除錯誤性的修模。地界碑模具出現不良現象的種類居多，原因也很復雜，有界碑模具方面的原因，也有工藝條件方面的原因。在修模前，應當根據界碑模具出現的不良現象的實際情況，進行細致地分析研究，找出造成塑件缺陷的原因后提出補救方法。修理地界碑模具更應慎重，沒有十分把握不可輕舉妄動。其原因是一旦變更了界碑模具條件，就不能再作大的改造和恢復原狀。Boundary tablet mold use method: in the manufacturing process of boundary tablet mold, we should strengthen the inspection, and focus on the dimensional accuracy. Although it is in the selection of molding materials, molding equipment, under the expected process conditions for the boundary pillar mold design, but people's understanding is often not perfect, so it is necessary to test the mold after the completion of the boundary pillar mold processing, to see the quality of the molded parts. After the discovery, repair the mold to eliminate errors. There are many kinds of bad phenomena in boundary tablet mold, and the reasons are very complex. There are also reasons for boundary tablet mold and process conditions. Before the mold repair, it is necessary to analyze and study carefully according to the actual situation of the boundary pillar mold defects, find out the causes of plastic parts defects, and then put forward remedial measures. We should be more careful in repairing the molds of boundary tablets. We should not act rashly if we don't have a good grasp. The reason is that once the boundary pillar mold conditions are changed, it is impossible to make major transformation and restore to the original state.