進口低溫不銹鋼電磁閥產品列表德國洛克

一、進口低溫不銹鋼電磁閥工作原理：

常閉：當線圈通電時，先導閥芯吸合，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開；當線圈斷電時，先導閥芯靠彈簧復位，先導孔關閉，閥腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。

常開：當線圈通電時，先導孔關閉，閥上腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。當線圈斷電時，先導閥芯靠彈簧復位，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開。

Normally closed: when the coil is energized, the pilot valve core is closed, the pilot hole is opened, the upper chamber of the valve is depressurized, the piston is pushed by the medium pressure of the lower chamber, and the solenoid valve is opened; when the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the valve chamber is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.

Normally open: when the coil is energized, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the return spring, and the solenoid valve is closed. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the pressure in the upper chamber of the valve is released, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.

二、進口低溫不銹鋼電磁閥規格參數：

1、閥體材質：不銹鋼

2、公稱通徑：DN3-200mm

3、壓力范圍：0-32Mpa

4、流體溫度：-196- +120℃

5、適用介質：液氮、液氨、制冷劑等超低溫液體或氣體

6、連接方式：法蘭、螺紋等

7、電壓偏差：允許波動±10%

8、閥體材料：不銹鋼

9、密封    ：金屬硬密封

10、環境溫度：-20~60℃

11、電氣連接：接線盒電纜插座，防護等級IP65

12、使用電壓：AC220V 50Hz/60Hz、DC24V·其余根據要求

13、可根據工況配置防爆裝置，  用于易燃易爆場合，防爆等級:ExdIIBT4

1. Valve body material: stainless steel

2. Nominal diameter: dn3-200 mm

3. Pressure range: 0-32mpa

4. Fluid temperature: - 196 - + 120 ℃

5. Applicable medium: liquid nitrogen, liquid ammonia, refrigerant and other ultra-low temperature liquid or gas

6. Connection mode: flange, thread, etc

7. Voltage deviation: allowable fluctuation ± 10%

8. Valve body material: stainless steel

9. Seal: metal hard seal

10. Ambient temperature: - 20 ~ 60 ℃

11. Electrical connection: junction box, cable socket, protection grade IP65

12. Voltage: AC220V, 50Hz / 60Hz, DC24 V · others as required

13. The explosion-proof device can be configured according to the working conditions, which is used in inflammable and explosive situations. The explosion-proof grade is ExdIIBT4 

三、進口低溫不銹鋼電磁閥產品簡介：

德國《LOCKE》洛克進口低溫不銹鋼電磁閥是指閥芯由經低溫深冷處理不銹鋼制成，密封件采用特種耐低溫材料，最低溫度可達-196度，有線圈驅動閥門開關，可實現對低溫介質的遠程自動化控制的閥門，適用于對液氮，液氨，液氧，液氬，液化天然氣LNG及低溫制冷劑的介質的開啟和關閉。

"Locke" low temperature stainless steel solenoid valve imported from Germany refers to the valve core made of low temperature and cryogenic treatment stainless steel, the seal adopts special low temperature resistant material, the minimum temperature can reach - 196 degrees, the valve has coil driven valve switch, which can realize remote automatic control of low temperature medium. It is suitable for liquid nitrogen, liquid ammonia, liquid oxygen, liquid argon, liquefied natural gas, LNG and low-temperature refrigerants On and off of the media.

四、進口低溫不銹鋼電磁閥結構特點：

進口低溫電磁閥具有,壽命長：此閥結構簡單，故障少，維修方便，閥芯由特種不銹鋼制成，耐磨性好，耐超低溫。本產品采用不銹鋼閥芯，在長時間不動作情況下啟動閥門，動作迅速，快速切斷；線圈長時間通電，發熱量低，不會燒毀，功耗底，節能；零壓啟動，零泄漏。

The imported low temperature solenoid valve has long service life: the valve has simple structure, few faults and convenient maintenance. The valve core is made of special stainless steel, with good wear resistance and ultra-low temperature resistance. The product adopts stainless steel valve core, which can start the valve without action for a long time, and cut off quickly; the coil is electrified for a long time, with low calorific value, no burning, low power consumption and energy saving; zero pressure starting and zero leakage.