進口鐘型浮子式蒸汽疏水閥產品列表德國洛克

 一、進口鐘型浮子式蒸汽疏水閥產品簡介：

德國《LOCKE》洛克-進口鐘型浮子式蒸汽疏水閥只有一個半浮球式的球桶為活動部件，開口朝下，球桶即是啟閉件，又是密封件。整個球面都可為密封，使用壽命很長，能抗水錘，沒有易損件，無故障，經久耐用，無蒸汽泄漏。背壓率大于80%，能排飽和溫度凝結水，最小過冷度為0℃，加熱設備里不存水，能使加熱設備達到最佳換熱效率。

當裝置剛啟動時，管道內的空氣和低溫凝結水經過發射管進入疏水閥內，閥內的雙金屬片排空元件把球桶彈開，閥門開啟，空氣和低溫凝結水迅速排出。當蒸汽進入球桶內，球桶產生向上浮力，同時閥內的溫度升高，雙金屬片排空元件收縮，球捅漂向閥口，閥門關閉。當球桶內的蒸汽變成凝結水，球桶失去浮力往下沉，閥門開啟，凝結水迅速排出。當蒸汽再進入球桶之內，閥門再關閉，間斷和連續工作。

Locke imported bell type steam trap has only one semi floating ball type ball barrel as the movable part. When the opening is facing down, the ball barrel is not only the opening and closing part, but also the sealing part. The whole spherical surface can be sealed, with long service life, water hammer resistance, no wearing parts, no fault, durable and no steam leakage. When the back pressure rate is more than 80%, it can drain the saturated temperature condensate, and the minimum subcooling degree is 0 ℃. There is no water in the heating equipment, which can make the heating equipment achieve the best heat exchange efficiency.

When the device is just started, the air and low-temperature condensate in the pipeline enter the drain valve through the launching pipe, the bimetal emptying element in the valve pops the ball barrel open, the valve is opened, and the air and low-temperature condensate are discharged rapidly. When the steam enters the ball barrel, the ball barrel will generate upward buoyancy. At the same time, the temperature in the valve will rise, the bimetal emptying element will contract, the ball poke will float to the valve port, and the valve will be closed. When the steam in the drum becomes condensed water, the drum loses buoyancy and sinks down. The valve opens and the condensed water is discharged quickly. When the steam enters the ball barrel again, the valve is closed again, intermittent and continuous operation.

二、進口鐘型浮子式蒸汽疏水閥技術參數：

◆規格范圍：DN15-DN100

◆溫度范圍：-40℃-600℃

◆壓力范圍：1.6-32Mpa

◆連接方式:法蘭、內螺紋、焊接。

◆制造標準:國標、美標。

◆閥體材質:鑄鋼、不銹鋼、鉻鉬鋼、鉻鉬釩鋼。

◆應用場合：用于蒸汽主管、分汽缸、熱交換器、硫化機、熱風式干燥機、圓筒式干燥機、蒸餾器、濃縮裝置、醫院消毒器等。超小型、重量輕的CTK5型最適用于空調機、洗滌機器、染聲機等。全不銹鋼的VCTK5型專為食品工業、醫院用汽設備制造。

◆ specification range: dn15-dn100

◆ temperature range: - 40 ℃ - 600 ℃

◆ pressure range: 1.6-32mpa

◆ connection mode: flange, internal thread, welding.

◆ manufacturing standard: national standard, American Standard.

◆ valve body material: cast steel, stainless steel, chrome molybdenum steel, chrome molybdenum vanadium steel.

◆ application: for steam main pipe, cylinder, heat exchanger, vulcanizer, hot air dryer, cylinder dryer, distiller, concentration device, hospital sterilizer, etc. The ultra small and light ctk5 is most suitable for air conditioner, washing machine, dyeing machine, etc. All stainless steel vctk5 is specially manufactured for the steam equipment of food industry and hospital.

三、進口鐘型浮子式蒸汽疏水閥性能及優點：

1、對凝結水的發生量適應性強，即可間歇排放，又可連續排放。

2、無與倫比的SCCV關閉系統，獨特設計，具有補償杠桿機械產生的誤差，避免關閉時的鋼性碰撞，關閉十分可靠，壽命長久。

3、內部零件全部采用不銹鋼制造，并且安裝在閥蓋上，維修保養極為方便。

4、鐘型浮子式疏水閥背壓率高。（90％）。

5、汽水分離可靠（水汽經U型通道從閥下部進入），閥內始終處于水封狀態，有效阻止蒸汽泄漏。

6、敝口形的浮子抗水擊。吊桶上設有溢出排氣孔，可有效防止蒸汽汽鎖、空氣氣堵現象。（非凝結性的高溫空氣也可排除）。

1. It has strong adaptability to the occurrence of condensate, which can be discharged intermittently or continuously.

2. The unique design of the unparalleled SCCV closing system can compensate the error caused by the lever mechanism, avoid the steel collision during the closing, and the closing is very reliable with long service life.

3. The internal parts are all made of stainless steel and installed on the valve cover, which is very convenient for maintenance.

4. The back pressure rate of bell type float type drain valve is high. （90％）。

5. The steam water separation is reliable (the water vapor enters from the lower part of the valve through the U-shaped channel), and the valve is always in the state of water seal, effectively preventing the steam leakage.

6. The open mouth float is water resistant. The bucket is equipped with an overflow vent, which can effectively prevent the steam lock and air blockage. (non condensable high temperature air can also be removed).