進口立式浮球式蒸汽疏水閥德國洛克型號齊全安全可靠

一、進口立式浮球式蒸汽疏水閥產品簡介：

德國《LOCKE》洛克公司生產進口立式浮球式蒸汽疏水閥，Vertical free ball float type steam trap，也叫立式疏水閥，立式疏水器，專用于立式的安裝形式，根據浮力的原理，使閥體內的浮球隨水位變化作升降運動，以達到閥門啟閉，即排水阻汽的作用的疏水閥。尤其對壓力低、排水量低和溫度穩定性要求高，不宜帶存凝結水的蒸汽設備更為適用。能排連續飽和水，至使設備凝結水滯存量較少、升溫快、加熱溫度穩定。能連續排水、性穩定、排水量大、漏水量小。

內部有一個精細研磨的不銹鋼空心浮球，既是浮子又是啟閉件，無易損零件，使用壽命很長。裝置剛起動時，管道內出現空氣和低溫冷凝水，雙金屬自動排空氣元件把浮球推離閥座，閥門打開，排除不凝結氣體，低溫冷凝水流進疏水閥，浮球上升，凝結水迅速排放。裝置很快提升溫度，管道內溫度上升到飽和溫度之前，雙金屬自動排空氣元件感溫變型伸直；蒸汽疏水閥進入正常運行狀況，浮球隨液位升降調節閥孔流量；當凝結水停止進入時，浮球隨介質流向逼近閥座，關閉閥門。立式自由浮球式蒸汽疏水閥的閥座總處于液位以下，形成水封，無蒸汽泄漏。

德國《LOCKE》洛克立式自由浮球式蒸汽疏水閥適用于蒸汽主管和伴熱管線，蒸汽管網及凝結水回收系統，特別對加熱速度要求快，溫度控制要求嚴，加熱設備不能積存凝結水的工藝更為合適，廣泛用于石油、化工、紡織、制藥等工礦企業。

Locke company of Germany produces imported vertical free ball float type steam trap, also known as vertical trap and vertical trap, which is specially used for vertical installation. According to the principle of buoyancy, the floating ball in the valve body moves up and down with the change of water level to achieve the opening and closing of the valve, that is, the trap with the function of drainage and steam blocking. Especially for the steam equipment with low pressure, low displacement and high temperature stability, which is not suitable for condensate storage. It can discharge continuously saturated water, so that the condensate storage of the equipment is less, the temperature rises quickly and the heating temperature is stable. Continuous drainage, stable performance, large displacement and small leakage.

There is a stainless steel hollow floating ball with fine grinding inside, which is not only a float but also a opening and closing part, without wearing parts, and has a long service life. When the device is just started, there is air and low-temperature condensate in the pipeline. The bimetal automatic air exhaust element pushes the floating ball away from the valve seat. The valve is opened to remove the non condensable gas. The low-temperature condensate water flows into the drain valve. The floating ball rises and the condensate is discharged rapidly. The device quickly raises the temperature. Before the temperature in the pipeline rises to the saturation temperature, the bimetal automatic exhaust air element temperature sensing variable straightens; the steam trap enters the normal operation condition, and the floating ball adjusts the valve hole flow with the liquid level rise and fall; when the condensate stops entering, the floating ball approaches the valve seat with the medium flow, and the valve is closed. The valve seat of vertical free floating ball steam trap is always below the liquid level, forming a water seal without steam leakage.

Locke vertical free floating ball steam trap in Germany is applicable to main steam pipe and heat tracing pipeline, steam pipe network and condensate recovery system. It is more suitable for the process of fast heating speed and strict temperature control, and the heating equipment can not accumulate condensate. It is widely used in petroleum, chemical, textile, pharmaceutical and other industrial and mining enterprises.

二、進口立式浮球式蒸汽疏水閥技術參數：

1、規格范圍：DN15-DN100

2、溫度范圍：-20℃≈350℃

3、壓力范圍：PN16-PN40

4、閥體材質：鑄鋼/不銹鋼/鉻鉬鋼

5、閥蓋材質：鑄鋼/不銹鋼/鉻鉬鋼

6、連接方式：法蘭，內螺紋連接

7、應用場合：水、水蒸汽。

1. Specification range: dn15-dn100

2、 Temperature range: -20 ℃ ~ 350 ℃

3. Pressure range: pn16-pn40

4. Valve body material: cast steel / stainless steel / chrome molybdenum steel

5. Valve cover material: cast steel / stainless steel / chrome molybdenum steel

6. Connection mode: flange, internal thread connection

7. Application: water, steam.

三、進口立式浮球式蒸汽疏水閥性能特點：

1、立式浮球式疏水閥不受壓力、溫度、冷凝水流量波動的影響，連續排水，有水即排，性能穩定，最小過冷度為 0℃ ，能使加熱設備達到最佳工作效率

2、立式浮球式疏水閥能排連續飽和水，至使設備凝結水滯存量較少、升溫快、加熱溫度穩定。

3、立式浮球式疏水閥有自動排冷空氣裝置，無汽鎖現象，工作平衡無噪音。

1. Vertical floating ball type drain valve is not affected by pressure, temperature and condensate flow fluctuation. It can drain continuously and discharge when there is water. Its performance is stable. The minimum subcooling degree is 0 ℃, which can make the heating equipment reach the best working efficiency

2. The vertical floating ball type drain valve can discharge continuously saturated water, so that the condensate storage of the equipment is less, the temperature rises quickly and the heating temperature is stable.

3. The vertical floating ball type drain valve is equipped with an automatic cooling air exhaust device, without steam lock, balanced operation and no noise.