進口低溫球閥德國洛克產品詳情參數尺寸圖片

一、進口低溫球閥描述：

德國《LOCKE》洛克進口低溫球閥(Low temperature valve)主要分為：低溫長桿球閥、低溫短軸球閥、低溫焊接球閥、低溫法蘭球閥、低溫螺紋球閥等。

允許根據客戶實際要求搭配不同閥軸長度、連接方式以及驅動方式等。密封性能好，在超低溫工作時擁有優良的理化性能。廣泛應用于LNG系統、低溫液態氣體儲運、制冷系統等。

The low temperature ball valve imported by Locke in Germany is mainly divided into: low temperature long rod ball valve, low temperature short shaft ball valve, low temperature welded ball valve, low temperature flange ball valve, low temperature threaded ball valve, etc.

It is allowed to match different valve shaft length, connection mode and driving mode according to the actual requirements of customers. It has good sealing performance and excellent physical and chemical properties at ultra-low temperature. It is widely used in LNG system, low temperature liquid gas storage and transportation, refrigeration system, etc.

二、進口低溫球閥技術參數：

1、尺寸規格：DN10-DN200；

2、溫度范圍：-196℃-80℃；

3、壓力范圍：PN15-PN100；

4、閥體閥蓋：特種低溫鋼；

5、閥座閥芯：鍛造低溫鋼、四氟；

6、閥桿形式：短軸、加長桿；

7、連接方式：德標/國標/美標、法蘭、焊接、內螺紋；

8、適用范圍：液態天然氣、已烯、二氧化碳、液氨、液氧、液氮、液氫等低溫介質

1. Size and specification: dn10-dn200;

2. Temperature range: - 196 ℃ - 80 ℃;

3. Pressure range: pn15-pn100;

4. Valve body and bonnet: special low temperature steel;

5. Valve seat and valve core: Forged low-temperature steel, Teflon;

6. Stem type: short shaft, extension rod;

7. Connection mode: German standard / national standard / American Standard, flange, welding, internal thread;

8. Scope of application: liquid natural gas, hexene, carbon dioxide, liquid ammonia, liquid oxygen, liquid nitrogen, liquid hydrogen and other low-temperature media

三、進口低溫球閥結構優點：

1、采用了在閥芯上開設減壓孔的構造。

2、墊片是使用了含有具有穩定密封性的陶瓷填充材料。

3、閥體輕、尺寸小。為了減少閥體的熱損失，特別是為了保證閥門超低溫下的使用，特意設計成重量輕、尺寸小的閥體。

4、長軸閥有低溫流體流經的閥，采用長閥桿形式，可以避開外部熱的作用使壓蓋保持常溫，以防止蓋密封件的性能降低。此長度是通過計算、試驗而得出的最佳長度。

1. The structure of opening a pressure reducing hole on the valve core is adopted.

2. The gasket is a ceramic filler material with stable sealing performance.

3. The valve body is light and small in size. In order to reduce the heat loss of the valve body, especially to ensure the use of the valve at ultra-low temperature, the valve body is specially designed to be light weight and small size.

4. The long shaft valve has a valve with low-temperature fluid flowing through, and adopts the long stem form, which can avoid the effect of external heat to keep the gland at normal temperature, so as to prevent the performance of the cover seal from decreasing. This length is the best length obtained by calculation and test.