進口高純氣體鋼瓶減壓閥德國洛克用心制造 

一、進口高純氣體鋼瓶減壓閥產品簡介：

德國LOCKE洛克進口高純氣體鋼減壓閥，就是將高純氣體鋼瓶中的高壓氣體減為實驗及工況所需的低壓氣體壓力的減壓閥。采用活塞式減壓結構，輸出壓力穩定，主要用于石油化工、化纖、照明電器、熱處理、冶金、玻璃、食品、醫藥、電子、國防航天等主導領域的高純氣體鋼瓶的出口減壓。

高純氣體一般都是貯存在專用的高壓氣體鋼瓶中，使用時通過減壓閥使氣體壓力降至實驗所需范圍，再經過其它控制閥門細調，使氣體輸入使用系統。由于高純氣體氣瓶內壓力較高，而氣焊和氣割和使用點所需的壓力卻較小，所以需要用減壓器來把高純氣體儲存在氣瓶內的較高壓力的氣體降為低壓氣體，并應保證高純氣體所需的工作壓力自始至終保持穩定狀態。進口高純氣體減壓器是將高壓高純氣體降為低壓氣體、并保持輸出高純氣體的壓力和流量穩定不變的調節裝置。

The high purity gas steel pressure reducing valve imported from Germany Locke is a pressure reducing valve which can reduce the high pressure gas in the high-purity gas cylinder to the low-pressure gas pressure required by experiments and working conditions. It is mainly used for export decompression of high purity gas cylinders in petrochemical industry, chemical fiber, lighting appliances, heat treatment, metallurgy, glass, food, medicine, electronics, national defense and aerospace.

High purity gas is usually stored in special high-pressure gas cylinder. When used, the gas pressure is reduced to the required range through the pressure reducing valve, and then the gas is input into the use system through fine adjustment of other control valves. Due to the high pressure in the cylinder of high purity gas, while the pressure required for gas welding, gas cutting and the point of use is relatively small, it is necessary to use a pressure reducer to reduce the high pressure gas stored in the cylinder into the low-pressure gas, and ensure that the working pressure required for the high-purity gas is stable from the beginning to the end. The imported high-purity gas pressure reducer is a regulating device which can reduce high-pressure and high-purity gas into low-pressure gas and keep the pressure and flow rate of high-purity gas output stable.

二、進口高純氣體鋼瓶減壓閥規格參數：

1、最大輸入壓力：3000，500 psig

2、輸出壓力：0～25，0～50，0～100， 0～250 psig

3、安全測試壓力：1.5倍的最大輸入壓力

4、適用溫度：-40°F 至＋165°F（-40℃至＋74℃）

1. Maximum input pressure: 3000500 PSI

2. Output pressure: 0-25, 0-50, 0-100, 0-250 psi

3. Safety test pressure: 1.5 times of the maximum input pressure

4. Applicable temperature: - 40 ° f to + 165 ° f (- 40 ℃ to + 74 ℃)

三、進口高純氣體鋼瓶減壓閥設計特點：

● 活塞式減壓結構 ● 母體螺紋：1/4" NPT（F） ● 內設過濾網 ● 可采用面板式或墻式安裝

■ 適用范圍

● 實驗室 ● 氣體分析測試 ● 流程控制 ● 氣體匯流排 ● 測試設備

■ 特性參數

● 最大輸入壓力： 3000，6000psig   ● 輸出壓力：0~250,0~500,0~1500,0~3000psig

● 安全測試壓力：1.5倍的最大進氣壓力 ● 適用溫度：-10℉~+165℉(-23℃~+74℃)

● 泄漏率：泡沫測試 ● CV值：0.06 ● 重量：0.9kg

材質：

◆母體：316L，Brass

◆上蓋：316L，Brass

◆膜片：316L

◆過濾網：316L（10μm）

◆閥座：PCTFE，PTFE，Vespel

◆彈簧：316L

◆閥芯頂桿：316L

Piston type pressure reducing structure ● mother thread: 1 / 4 "NPT (f) ● filter screen inside ● can be installed in panel or wall

■ scope of application

● laboratory ● gas analysis and test ● process control ● gas bus ● test equipment

Characteristic parameters

Maximum input pressure: 30006000 psi ● output pressure: 0 ~ 250,0 ~ 500,0 ~ 1500,0 ~ 3000psi

Safety test pressure: 1.5 times of maximum inlet pressure ● applicable temperature: - 10 ℃～ 165 ℃ (- 23 ℃ ~ + 74 ℃)

Leakage rate: foam test > CV: 0.06: weight: 0.9kg

texture of material:

Maternal body: 316L, brass

Upper cover: 316L, brass

Membrane: 316L

Filter screen: 316L (10 μ m)

Valve seat: PCTFE, PTFE, Vespel

Spring: 316L

Valve core ejector: 316L