進口高性能蝶閥選德國洛克專業生產質量放心   

一、進口高性能蝶閥產品簡介：

德國《LOCKE》洛克進口高性能蝶閥采用雙偏心結構設計。閥軸雙偏離閥體結構中心，同時結合閥板圓弧密封面設計，使閥板在打開時迅速脫離密封座，以減小密封面的摩擦力，閥板在關閉時具有良好的密封性能。中心自定位密封閥座結構設計結合獨 特的閥座補償密封設計，使閥座密封得到有效補償?shù)耐瑫r(shí)減少開啟、關閉時的摩擦力，大大減小閥門的操作力，有效提高了蝶閥的控制精確度。該系列蝶閥密封性能穩定可靠，使用壽命長。適用于一般腐蝕性氣體，液體介質的調節和切斷使用。

The imported high-performance butterfly valve Locke from Germany adopts the double eccentric structure design. The valve shaft deviates from the structure center of the valve body. At the same time, combined with the design of the arc sealing surface of the valve plate, the valve plate is quickly separated from the sealing seat when it is opened, so as to reduce the friction of the sealing surface. The valve plate has good sealing performance when it is closed. The structure design of the center self positioning seal valve seat combined with the unique valve seat compensation seal design can effectively compensate the valve seat seal, reduce the friction during opening and closing, greatly reduce the operating force of the valve, and effectively improve the control accuracy of the butterfly valve. This series of butterfly valves have stable and reliable sealing performance and long service life. It is suitable for regulating and cutting off the general corrosive gas and liquid medium.

二、進口高性能蝶閥技術參數：

1. 公稱通經：DN40～1000mm

2. 公稱壓力：150～300LB

3. 適用溫度：-30～+150℃

4. 連接方式：對夾，法蘭

5. 閥結構：二偏心、三偏心

6. 閥體材質：304、316、碳鋼

7. 閥板材質：304、316

8. 密封材質：PTFE(可定增強型PTFE)

9. 適用介質：氣體、水及油類等

1. Nominal diameter: dn40-1000mm

2. Nominal pressure: 150-300lb

3. Applicable temperature: - 30 ~ + 150 ℃

4. Connection mode: clamp, flange

5. Valve structure: two eccentric and three eccentric

6. Valve body material: 304, 316, carbon steel

7. Valve plate material: 304, 316

8. Sealing material: PTFE (adjustable reinforced PTFE)

9. Applicable media: gas, water, oil, etc

三、進口高性能蝶閥產品優點：

1、蝶閥為雙向承壓，雙向金屬密封，特殊的結構形式可任意調整密封比壓，采用偏心S形錐形閥座密封面，使密封面不易損壞，提高閥門的使用壽命。

2、操作扭矩較小，轉90度啟閉，輕便迅速。

3、流阻小，具有良好的水力特性，流量特性近似傾斜直線 ，節能效果好，雙向密封對水流無方向要求。

4、密封可靠，啟閉壽命達數25000次以上。

1. The butterfly valve is of two-way pressure bearing and two-way metal sealing. The sealing pressure ratio can be adjusted arbitrarily in special structure. The eccentric S-shaped cone-shaped seat sealing surface is adopted, which makes the sealing surface not easy to be damaged and improves the service life of the valve.

2. Operating torque is small, turn 90 degrees open and close, light and fast.

3. It has small flow resistance, good hydraulic characteristics, flow characteristics similar to inclined straight line, good energy-saving effect, two-way sealing has no direction requirements for water flow.

4. The seal is reliable, and the opening and closing life is more than 25000 times.