德國洛克供應優質進口雙向壓蝶閥

一、進口雙向壓蝶閥產品簡介：

德國《LOCKE》洛克進口雙向壓蝶閥(Dual pressure valve)構造合理，密封緊密牢靠、流阻小、壓差低、驅動靈敏省力，運用壽命倍增。雙公平，即軸向公平，閥軸中心線不在閥板密封面上；徑向公平：閥軸中心線不在閥門通道的中心線上，閥板采用雙平板桁架式多流道構造，在流速較高時，各流道水流可以相互制衡，防止閥板呈現哆嗦景象，確保閥門的穩定性。特殊的設計，特殊的幾何構造，使閥板具有越關越緊的功用，當翻開閥門時，只需閥軸略微旋轉，閥板即全部脫離閥座，增加了摩擦力，使開啟力矩出現最小最佳形態，密封嚴實牢靠，經久耐用。

The dual pressure valve imported from Locke, Germany, has reasonable structure, tight and reliable seal, small flow resistance, low pressure difference, sensitive and labor-saving driving, and double service life. Double fairness, i.e. axial fairness, the center line of the valve shaft is not on the sealing surface of the valve plate; radial fairness: the center line of the valve shaft is not on the center line of the valve channel, and the valve plate adopts the double plate truss type multi channel structure. When the flow velocity is high, the flow in each channel can check and balance each other, so as to prevent the valve plate from shivering and ensure the stability of the valve. The special design and special geometry structure make the valve plate have the function of closing and tightening. When the valve is opened, only the valve shaft rotates slightly, and the valve plate is completely separated from the valve seat, increasing the friction force, making the opening torque appear the minimum optimal form, and the sealing is tight and reliable, durable.

二、進口雙向壓蝶閥技術參數：

公稱通徑:  DN50-2000mm

公稱壓力：PN0.6-4.0MPa

適用介質：蒸汽，油品，熱空氣，腐蝕性濁水，煤氣，含有微小顆粒，易結晶，腐蝕性等介質

滲漏率：＜0.1×DNmmз/s

適用溫度：軟密封：-40℃-350℃  硬密封：-50℃-600℃

傳動方式：蝸輪傳動，電動傳動，氣動傳動，液動傳動

Nominal diameter: dn50-2000mm

Nominal pressure: pn0.6-4.0mpa

Applicable media: steam, oil, hot air, corrosive turbid water, gas, containing micro particles, easy to crystallize, corrosive and other media

Leakage rate: ＜ 0.1 × dnmm з / S

Applicable temperature: soft seal: - 40 ℃ - 350 ℃ hard seal: - 50 ℃ - 600 ℃

Transmission mode: worm drive, electric drive, pneumatic drive, hydraulic drive

三、進口雙向壓蝶閥主要零部件材質： 

閥體、填料、壓蓋：WCB

蝶板：不銹鋼304

閥桿：不銹鋼304

蝶板密封圈：不銹鋼、石墨夾層的復合結構

閥體密封面：合金鋼

填料：柔性石墨

手輪：球墨鑄鐵

Valve body, packing and gland: WCB

Butterfly plate: stainless steel 304

Stem: stainless steel 304

Butterfly plate seal ring: composite structure of stainless steel and graphite interlayer

Valve body sealing surface: alloy steel

Packing: flexible graphite

Hand wheel: nodular cast iron