優質進口不銹鋼安全閥品牌推薦德國洛克

一、進口不銹鋼安全閥描述：

德國LOCKE洛克進口不銹鋼安全閥整體材質選用優質不銹鋼鑄造而成，采用全封閉閥蓋和閥帽結構，安全閥開啟排放時，介質不會向外界泄漏，而全部通過排泄管排掉，又可防止灰塵等雜質進入閥內，適用于溫度不高于200°C的腐蝕性氣體和需要大排量的液體介質。廣泛應用于給排水、工業、蒸汽、油田、電站等流體管道。

The whole material of Locke lock imported stainless steel safety valve is made of high-quality stainless steel. It adopts the structure of fully closed valve cover and bonnet. When the safety valve is opened and discharged, the medium will not leak out from the outer boundary, but all will be discharged through the discharge pipe, which can prevent dust and other impurities from entering the valve. It is suitable for corrosive gas with temperature not higher than 200 ° C and liquid medium with large displacement. It is widely used in water supply and drainage, industry, steam, oil field, power station and other fluid pipelines.

二、進口不銹鋼安全閥技術參數：

1、尺寸范圍：DN15～DN300

2、壓力等級：1.0～32.0MPa

3、整定壓力范圍大:0.06～32.0MPa

4、制造標準：國標、德標、美標。

5、殼體材料：碳鋼、不銹鋼、合金鋼

6、適用介質：氣體、液體、蒸汽

1. Size range: DN15 ～ DN300

2. Pressure rating: 1.0 ～ 32.0mpa

3. Large setting pressure range: 0.06-32.0mpa

4. Manufacturing standard: national standard, German standard and American Standard.

5. Shell material: carbon steel, stainless steel, alloy steel

6. Applicable medium: gas, liquid, steam

三、進口不銹鋼安全閥結構優點：

法蘭連接，DIN和ANSI 標準法蘭

螺紋連接，NPT/BSP/G標準螺紋

噴嘴和閥芯同時適用于對蒸汽、氣體、液體

彈簧具有非常寬的調整范圍

單閥桿、雙導向、中心定位球設計,確保安全閥具有非常好的密封性及使用壽命

安全閥閥體采用無死區設計，避免了安全閥排放時可能殘留的介質及可能對安全閥閥體造成的腐蝕

安全閥部件少,互換性強,外型結構緊湊,維護方便

具有封閉式閥蓋

安全閥閥體材質為WCB,304,316L等

安全閥噴嘴和閥芯材質為304、316、317、316L、MONEL、INCONEL、Hastelloy等,所有密封面均作司特利硬質合金堆焊處理。

Flange connection, DIN and ANSI standard flange

Threaded connection, NPT / BSP / G standard thread

Nozzle and valve core are applicable to steam, gas and liquid at the same time

The spring has a very wide adjustment range

Single stem, double guide and center setting ball design ensure the safety valve has very good sealing performance and service life

The safety valve body adopts the dead zone free design, which avoids the possible residual medium and the possible corrosion to the safety valve body when the safety valve is discharged

The safety valve has few parts, strong interchangeability, compact structure and convenient maintenance

With closed bonnet

The material of safety valve body is WCB, 304316l, etc

The material of safety valve nozzle and valve core is 304, 316, 317, 316L, Monel, Inconel, Hastelloy, etc. all sealing surfaces are made of Stellite hardfacing.