德國洛克進口對夾式止回閥品牌

一、進口對夾式止回閥描述：

德國LOCKE洛克進口對夾式止回閥由閥體、閥瓣、閥桿及彈簧等零件組成,采用對夾連接。由于閥瓣的關閉行程短,并且有彈簧加載,可顯著減少水錘現象。該閥主要適用于城市、工業及高層建筑給水、排水管網上。由于其結構長度比一般止回閥短,對有安裝空間限制的場所最為適用。對夾式止回閥用于純凈管路及工業、環保、水處理、高層建筑給排水管路,阻止介質逆向流動之用。

The wafer check valve imported from Locke lock, Germany, is composed of valve body, disc, stem, spring and other parts, which are connected by wafer. Due to the short closing stroke of the disc and the spring loading, the water hammer phenomenon can be significantly reduced. The valve is mainly applicable to the water supply and drainage network of urban, industrial and high-rise buildings. Because its structure length is shorter than general check valve, it is most suitable for places with installation space limitation. The wafer check valve is used for pure pipeline and industrial, environmental protection, water treatment, high-rise building water supply and drainage pipeline to prevent the reverse flow of media.

二、進口對夾式止回閥技術參數：

1、公稱通徑：DN15-DN300

2、公稱壓力：PN16-PN320  150LB-2500LB

3、使用溫度：-40℃～+500℃

4、閥體材質：鑄鐵、鑄鋼、不銹鋼

5、閥芯材質：不銹鋼、鑄鋼等

6、連接方式：對夾式

7、流體范圍: 水、油品、氣體、天燃?xì)?、硝酸?/font>

8、安裝方式：水平、立式（安裝時注意流體箭頭方向）

1. Nominal diameter: dn15-dn300

2. Nominal pressure: pn16-pn320 150lb-2500lb

3. Service temperature: - 40 ℃ ~ + 500 ℃

4. Valve body material: cast iron, cast steel, stainless steel

5. Valve core material: stainless steel, cast steel, etc

6. Connection mode: wafer type

7. Fluid range: water, oil, gas, natural gas, nitric acid

8. Installation mode: horizontal and vertical (pay attention to the direction of fluid arrow during installation)

三、進口對夾式止回閥結構優點：

1、結構長度短．其結構長度只有傳統法蘭止回閥的1/4～1/8;

2、體積小,、重量輕,其重量只有傳統法蘭止回目的1/4～1/20;

3、閥瓣尖閉快速．水錘壓力?。?/font>

4、水平管道或垂直管道均可使月．安裝方便；

5、流道通暢、流體阻力?。?/font>

6、動作i敏、密封性能好;

7、目瓣行程短、關閥沖擊力小;

8、整體結構、簡單緊湊、造型美觀

9、使月壽命長、可靠性高。

1. Its structure length is only 1 / 4-1 / 8 of the traditional flange check valve;

2. Small volume, light weight, its weight is only 1 / 4-1 / 20 of the traditional flange check;

3. Quick closing of valve disc tip, small water hammer pressure:

4. The horizontal pipe or vertical pipe can make the month and installation convenient;

5. The flow passage is smooth and the fluid resistance is small

6. Action I sensitive, good sealing performance;

7. Short stroke of eye flap and small impact force of valve closing;

8. Overall structure, simple and compact, beautiful shape

9. Long monthly life and high reliability.