自嵌式植生擋土塊模具

自嵌式植生擋土塊模具屬于以工程塑料聚丙烯為主要生產原材料的塑料模具的一種，關于模具的防護方法主要也是針對塑料模具而進行的。首先，雖然塑料模具有不錯的抗壓能力，但是與鋼模具相比還是比較脆弱的，需要避免在模具表面放置重物。在使用模具時也要盡量做到輕輕搬運，使用步驟要嚴格遵守要求，需要防止操作不當而對自嵌式擋土塊模具表面造成的不必要的損害。其次，使用完模具之后需要使用清洗劑對模具進行徹底的清洗，然后還需要在清洗干凈的自嵌式擋土塊模具表面涂上一層保護劑。做完這些處理就需要對模具進行存儲了，關于模具的存儲環境也有很多需要注意的事項，一方面存儲環境的空氣濕度不宜過高，因?yàn)樵诔睗竦沫h(huán)境下會加速模具的氧化。另一方面模具的存儲環境也要避免陽光的照射，因?yàn)殚L時間的陽光照射容易使模具表面發黃、變脆。模具的尺寸是可以根據用戶的需求進行改變的，用戶也可以提出模具的訂制服務，常用的模具尺寸為50厘米*40厘米*12厘米。The self inlaid planting block mold is a kind of plastic mold which takes the engineering plastic polypropylene as the main raw material. The mold protection method is mainly aimed at the plastic mold. First of all, although the plastic mold has good compressive capacity, it is still relatively fragile compared with the steel mold, so it is necessary to avoid placing heavy objects on the surface of the mold. When using the mold, it is also necessary to handle it gently as much as possible. The use steps shall strictly comply with the requirements, and it is necessary to prevent unnecessary damage to the surface of the self embedded retaining block mold caused by improper operation. Secondly, after using the mold, it needs to use cleaning agent to clean the mold thoroughly, and then it needs to apply a layer of protective agent on the surface of the cleaned self-contained block mold. After these processes, the mold needs to be stored, and there are many matters needing attention about the mold storage environment. On the one hand, the air humidity of the storage environment should not be too high, because the mold oxidation will be accelerated in the humid environment. On the other hand, the storage environment of the mold should also avoid the sunlight, because the long-term sunlight is easy to make the mold surface yellow and brittle. The size of the mold can be changed according to the user's requirements, and the user can also provide the customized service of the mold. The commonly used mold size is 50cm * 40cm * 12cm.