

河北宏旭模具制造有限公司
主營產品: 護坡模具
宏旭泄水槽塑料模具結構原理
價格
訂貨量(套)
¥440.00
≥5
店鋪主推品 熱銷潛力款
ῡῤῦ῟῟ῢῧῧῤῧῧ
在線客服
泄水槽塑料模具
泄水槽塑料模具、集水槽鋼模具、方U流水槽鋼模具、圓U流水槽鋼模具、流水槽塑料模具、急流槽鋼模具、排水溝鋼模具、渡水槽鋼模具、電纜溝鋼模具等。泄水槽鋼模具采用4mm鋼板焊接而成,每個型面都可打開,使用方便、出??欤顾鄄垆撃>呱a(chǎn)的預制件主要起排水的作用,可以讓路面上的積水有個好的去向。
泄水槽塑料模具使用過程:首先在模具里面刷上機油和脫模劑,有利于脫模具,然后將攪拌好的水泥或混凝土倒入模具中,經振動平臺振動成形,或振動棒振搗,等水泥初期凝固之后便可脫模,約24小時左右。
Drain tank plastic mold, collecting tank steel mold, square u water channel steel mold, round u water channel steel mold, water channel plastic mold, water channel steel mold, drainage channel steel mold, water channel steel mold, cable channel steel mold, etc. The drain channel steel mould is welded with 4mm steel plate, each profile can be opened, which is easy to use and quick to exit. The prefabricated parts produced by the drain channel steel mould mainly play the role of drainage, which can make the water on the road have a good direction.
Use process of drain tank plastic mold: first, brush oil and release agent inside the mold to facilitate mold removal, then pour the mixed cement or concrete into the mold, vibrate through the vibration platform, or vibrate with a vibrator, and then demould after the initial setting of cement, about 24 hours.