預制生態框模具

預制生態框模具制作的時候要檢查他的拼接位置，因?yàn)楹附拥墓に嚭苤匾?，如果在模具拼接的位置或者是其他的位置出現松動的情況是不合格的，這樣的模具容易出現漏漿的問題，不能夠很好的進行固定，另外就是要看兩塊模具的用料是否均勻，正常的預制生態框模具他們的面板厚度和筋板的厚度應該是一樣的，不能夠出現一塊模具厚一塊模具薄的情況，這樣的模具不僅僅是不合格，而且他的使用效果非常的差，所以挑選的時候要非常的仔細?，F(xiàn)在的市面上有著很多的預制生態框模具，因?yàn)樗氖褂猛緩皆絹碓綄拸V，所以格式各樣的模具開始在市面上出現，如果不了解模具的話，在挑選的時候就容易出現差錯，所以需要為大家講解一些怎樣進行模具的挑選。首先來說要了解這個預制生態框模具的實際作用是什么，用來美化環境還是能夠更好的利用水土資源，不同的用處他們的型號尺寸都是有差別的，在使用的時候會將模具拆開，然后清洗、組裝、刷油。When making the prefabricated eco frame mould, check its splicing position, because the welding process is very important. If there is looseness at the splicing position or other positions of the mould, it is not qualified. Such mould is prone to slurry leakage and cannot be fixed well. In addition, it is necessary to see whether the materials used for the two moulds are even and the prefabricated eco frame is normal The thickness of the panel and rib of the mould should be the same. It is impossible to have one mould thick and one mould thin. Such a mould is not only unqualified, but also has a very poor use effect, so it should be selected carefully. There are a lot of prefabricated eco frame molds on the market now. Because of its wider and wider use way, various molds begin to appear on the market. If you don't understand the molds, there will be errors in the selection, so you need to explain how to select the molds. First of all, we need to know what the actual function of the prefabricated eco frame mold is, whether it is used to beautify the environment or to make better use of water and soil resources. Their models and sizes are different for different purposes. When using, the mold will be disassembled, then cleaned, assembled and painted.