堤壩U型槽鋼模具

堤壩U型槽鋼模具廠家生產技術是以嚴格的焊接標準要求，因?yàn)?/span>堤壩U型槽鋼模具的生產比較精細化，尤其是在壁厚控制、長寬高尺寸的把握上都有明確的要求，誤差不得超過0.5cm，而且拆模要求內外可拆結構。通過對U型槽鋼模具廠家生產技術的理解，盡管U型槽存在眾多的型號，但是其根本的生產技術是不變的，不管是從下料還是焊接，都是以U型為主體，采取點焊的模式，既可以節省人工，也可以保證模具質量。在長達十年的堤壩U型槽鋼模具生產中，廠家不僅僅總結是對此類模板的生產經驗，也是對于該模具衍生出的其他類型的水槽模具，比如矩形槽、流水槽模具等等，盡管外形或者尺寸都是不同，但是生產技術的內容都是同一原理。兩年的時間里，從按圖定制到自行開發設計，這一過程雖然時間短，但是彰顯出我廠的生產技術以及設計水平，更主要的是客戶對于我廠的信任度不斷增加。

The production technology of U-shaped channel steel mould manufacturers for dykes is based on strict welding standard requirements, because the production of U-shaped channel steel mould for dykes is relatively refined, especially in the control of wall thickness, length, width and height, there are clear requirements, the error shall not exceed 0.5cm, and the inner and outer detachable structures are required for formwork removal. Through the understanding of the production technology of U-shaped channel steel mold manufacturers, although there are many types of U-shaped channel, its basic production technology is unchanged. No matter from blanking or welding, U-shaped channel is the main body, adopting spot welding mode can not only save labor, but also ensure the quality of mold. In the production of U-shaped channel steel mould for dyke for ten years, the manufacturer not only summarizes the production experience of this kind of mould, but also for other types of channel mould derived from the mould, such as rectangular groove, flume mould, etc. Although the shape or size are different, the content of production technology is the same principle. In the two years, from customization to self-development and design, although the process is short, it shows the production technology and design level of our factory, and more importantly, the customer's trust in our factory is increasing.