水泥魚巢磚鋼模具設計方法及說明

魚巢磚護坡模具，而是是采用了固定的預制方案來生產處理，在進行加工的時候主要是分為了三部分，只要按照規定的方式進行加工的話，才可以保證生產出來的護坡磚預制件是合格的。

1. 使用魚巢磚護坡模具加工之前要進行拼接的處理，整個模具由于型號偏大，長度都是在一米左右，運輸?shù)臅r候會造成很大的不便，所以就要將整個模具拆開來進行運輸?shù)奶幚?，之后則是要注意好拼接時每個零件的使用，如果螺栓使用的規格不一致的話，就會造成組裝完成后不能夠正常的使用，也會導致澆筑上泥漿后有漏漿的危險情況。

2.魚巢磚護坡模具組裝完成后要在內腔中涂刷上機油，當更好的是涂刷上一定的脫模劑，脫模劑和機油都是用來進行模具保護的，如果說在生產時沒有來進行刷油這一步就會造成整個模具直接的和泥漿進行接觸。

3. 泥漿攪拌均勻后澆筑在模具中，可以拆入規定的振動棒來排除氣泡，這樣生產出來的魚巢磚護坡模具預制件就不會受到影響了，在凝固后才可以來進行脫模。

The fish nest brick slope protection mould adopts the fixed prefabrication scheme for production and processing. When processing, it is mainly divided into three parts. As long as the processing is carried out in the prescribed way, the prefabricated parts of the slope protection brick can be guaranteed to be qualified.

One Before using the fish nest brick slope protection mould for processing, the splicing shall be carried out. The whole mould is too large and the length is about one meter, which will cause great inconvenience during transportation. Therefore, the whole mould shall be disassembled for transportation. After that, attention shall be paid to the use of each part during splicing. If the specifications of bolts are inconsistent, the assembling will be caused After installation, it can not be used normally, which will also lead to leakage of slurry after pouring.

2. After the assembly of the slope protection mould of fish nest brick is completed, oil shall be applied in the inner cavity. When it is better to apply certain release agent, both release agent and oil are used to protect the mould. If the oil is not applied in the production, the whole mould will directly contact with the mud.

3. After the slurry is evenly mixed and poured into the mold, the specified vibrator can be removed to eliminate the bubbles, so that the prefabricated parts of the slope protection mold of the fish nest brick produced will not be affected, and the demoulding can be carried out after the solidification.