15%玻璃纖PPA-AMODEL-AT-6115-HS
價格
訂貨量(公斤)
¥42.00
≥25
店鋪主推品 熱銷潛力款
㜉㜆㜋㜇㜊㜇㜉㜈㜊㜇㜇
在線客服
PPA AMODEL AT-6115 HS
Amodel? AT-6115 HS is a 15% glass-fiber reinforced, toughened grade of polyphthalamide (PPA) resin designed to possess more elongation than other 15% glass-fiber reinforced grades of Amodel resin. This grade was developed for automotive snap-fit electronic connectors. It offers high flow and short molding cycles.
- Black: AT-6115 HS BK 324
- Natural: AT-6115 HS NT
Key Attributes: Fast Molding Cycle; Good Mold Release; Heat Stabilized; High Elongation; High Flow; Impact Modified; Lubricated
Applications: Automotive Applications; Automotive Electronics; Automotive Under the Hood; Connectors; General Purpose; Housings; Industrial Applications; Industrial Parts; Machine/Mechanical Parts; Metal Replacement; Valves/Valve Parts
Automotive Specifications: ASTM D4000 PPA0123 G15 GB121 KD100 KN042 PN068 YI242; ASTM D6779 PA103G15; DELPHI M-4628 Color: BK324 Black; DELPHI M-4628 Color: NT Natural; FORD WSS-M98P14-A3; GM GMP.PPA.020 Color: BK-324 Black; GM GMP.PPA.020 Color: NT Natural; GM GMW16363P-PPA-GF15 Color: Black; GM GMW16363P-PPA-GF15 Color: Natural; ISO 1874 PA6T/66-HI, MH, 11-050, GF15; PSA Peugeot-Citro?n FTM64-0115
Injection Notes: Injection Rate: 2 to 4 in/sec
Holding Pressure: 50% of injection pressure
Storage:
- Amodel? compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. Manufacturer recommendeds that Amodel? resins be dried prior to molding.
PPA AMODEL AT-6115 HS
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.22 g/cc | 0.0441 lb/in3 | Method A; ISO 1183 |
Water Absorption | 0.20 % @Time 86400 sec | 0.20 % @Time 24.0 hour | ASTM D570 |
Linear Mold Shrinkage, Flow | 0.010 cm/cm | 0.010 in/in | ASTM D255 |
Linear Mold Shrinkage, Transverse | 0.011 cm/cm | 0.011 in/in | ASTM D255 |
Mechanical Properties | Metric | English | Comments |
Tensile Strength at Break | 68.3 MPa @Temperature 100 °C | 9910 psi @Temperature 212 °F | ISO 527-2 |
126 MPa @Temperature 23.0 °C | 18300 psi @Temperature 73.4 °F | ISO 527-2 | |
Tensile Strength | 95.8 MPa | 13900 psi | Conditioned; ASTM D638 |
122 MPa | 17700 psi | ASTM D638 | |
Elongation at Break | 5.3 % | 5.3 % | Conditioned; ASTM D638 |
4.1 % @Temperature 23.0 °C | 4.1 % @Temperature 73.4 °F | ISO 527-2 | |
7.7 % @Temperature 100 °C | 7.7 % @Temperature 212 °F | ISO 527-2 |
PPA (Polyphthalamide ) 聚鄰苯二甲酰胺,在高溫高濕狀態下,PPA的抗拉強度比尼龍6高20%,比尼龍66更高;PPA材料的彎曲模量比尼龍高20%,硬度更大,能抗長時間的拉伸蠕變;且PPA的耐汽油、耐油脂和冷卻劑的能力也比PA強;一種耐高溫尼龍,這種材料可以耐200℃的持續高溫,并且還能保持良好的尺寸穩定性 [1] 。
聚鄰苯二甲酰胺(簡稱PPA)樹脂是以對苯二甲酸或間苯二甲酸為原料的半芳香族聚酰胺。既有半結晶態的,也有非結晶態的,其玻璃化溫度在255°F左右。非結晶態的PPA主要用于要求阻隔性能的場合;半結晶態的PPA樹脂主要用于注塑加工,也用于其它熔融加工工藝。下文主要介紹后者——半結晶態PPA樹脂,特別注明的除外。半結晶態PPAS的熔點約為590°F,以不透明矩形切片的形式供應。
PPA AMODEL AT-6115 HS 可提供COA、COC,ROHS.MSDS.UL黃卡等等資料,價格最優,質量保證!