德國洛克供應優質進口壓力自密封鍛鋼閘閥

一、進口壓力自密封鍛鋼閘閥產品描述：

德國《LOCKE》洛克進口壓力自密封鍛鋼閘閥(Pressure self sealing forged steel gate valve)有三種閥蓋設計形式。第一種是螺栓式閥蓋，按這種設計形式設計的閥門，其閥體與閥蓋用螺栓螺母連接，纏繞式墊片 (316夾柔性石墨制造)密封。客戶有特殊要求時也可采用金屬環連接。第二種設計形式是焊接式閥蓋，按這種設計形式的閥門，其閥體與閥蓋用螺紋連接，全焊密封?？蛻粲刑厥庖髸r也可采用全焊逶連接。第三種是壓力自緊式閥蓋，按這種設計形式設計的閥門，其閥體與閥蓋用螺紋連接，內壓自密封環密封。

There are three design forms of pressure self sealing forged steel gate valve. The first type is bolted bonnet. The valve body and bonnet are connected by bolts and nuts, and the spiral wound gasket (made of 316 clip of flexible graphite) is sealed. Metal ring connection can also be used when customers have special requirements. The second design is welded bonnet, according to this design, the valve body and bonnet are connected by thread and sealed by full welding. When customers have special requirements, they can also use full welded wire connection. The third type is pressure self tightening bonnet. The valve body and bonnet are connected by thread and sealed by internal pressure self sealing ring.  

二、進口壓力自密封鍛鋼閘閥技術參數：

1、口徑尺寸:DN10-DN200  [3/8＂－8＂]

2、壓力范圍:PN160-PN420  900LB-2500LB

3、溫度范圍: -40℃-500℃

4、閥體材質:鍛鋼、鍛不銹鋼

5、閥桿閥蓋材質:和本體一樣

6、密封材質:金屬密封

7、填料:增強型PTFE

8、連接方式:對焊、法蘭、螺紋

1. Caliber size: dn10-dn200 [3 / 8 "- 8"]

2. Pressure range: pn160-pn420 900lb-2500lb

3. Temperature range: - 40 ℃ - 500 ℃

4. Valve body material: forged steel, forged stainless steel

5. Material of valve stem and bonnet: the same as the body

6. Seal material: metal seal

7. Filler: Reinforced PTFE

8. Connection mode: butt welding, flange, thread

三、進口壓力自密封鍛鋼閘閥采用以下結構： 

全徑鍛鋼閘閥或縮徑鍛鋼閘閥

明桿支架式（OS&Y）

自定心壓板壓套式

螺紋連接內壓自緊式閥蓋

整體式上密封座

承插端符合ASME B16.11

螺紋連接端（NPT）符合ANSI/ASME B1.20.1

1.鍛鋼閥門采用壓力自緊式密封，閥體支管兩端為焊接連接。

2.閥坐、閥瓣密封面采用鈷基硬質合金等離子噴焊而成，耐磨、抗擦傷性能好。

3.閥桿經抗腐蝕性氮化處理，有良好的抗腐蝕性和抗擦傷性。

Full diameter forged steel gate valve or reduced diameter forged steel gate valve

OS & Y

Self centering pressing plate sleeve type

Screwed internal pressure self tightening bonnet

Integral upper seal seat

Socket end to ASME B16.11

Threaded end (NPT) in accordance with ANSI / ASME b1.20.1

1. Forged steel valve adopts pressure self tightening seal, and both ends of branch pipe of valve body are welded.

2. The sealing surface of valve seat and disc is made of cobalt based carbide plasma spray welding, with good wear resistance and scratch resistance.

3. The valve rod has good corrosion resistance and scratch resistance after anti-corrosion nitriding treatment.