進口不銹鋼閘閥使用效果比較以及使用壽命德國洛克 

一、進口不銹鋼閘閥產品描述：

德國《LOCKE》洛克進口不銹鋼閘閥(Stainless steel gate valve)主要用于石油、化工、冶金、制藥等各類系統中，閥門的保溫夾套焊裝于閥門的兩法蘭之間，閥門的側面、底部設置有保溫夾套的連接口，保溫夾套中可自由地流過蒸汽，導熱油或其它熱的保溫介質，確保粘稠介質可順暢地流過閥門，而不會凝固，降溫。

進口保溫不銹鋼閘閥適用子公稱壓力PNl．0—10．0MPa、Classl50—600、JISlOK—20K，工作溫度-29—425℃(碳鋼)、-40—500℃(不銹鋼)的管路上作啟閉用，并能保溫和防止介。

German lock stainless steel gate Valve) is mainly used in petroleum, chemical industry, metallurgy, pharmaceutical and other systems. The heat preservation jacket of the valve is welded between the two flanges of the valve. The side and bottom of the valve are provided with the connection port of the heat preservation jacket. The heat preservation jacket can freely flow through the steam, heat conduction oil or other hot heat preservation medium, so as to ensure that the viscous medium can flow smoothly through the valve without solidification and cooling.

The imported insulated stainless steel gate valve is applicable to the pipeline with sub nominal pressure of pnl.0-10.0mpa, classl50-600, jislok-20k, working temperature of - 29-425 ℃ (carbon steel) and - 40-500 ℃ (stainless steel) for opening and closing, and can be insulated and prevented.

二、進口不銹鋼閘閥技術參數：

1、公稱通徑：DN15-1000mm

2、公稱壓力：PN1.0-6.4MPA

3、適用介質：水、油、污水、酸堿

4、適用溫度：≤300℃

5、材    質：不銹鋼304.316.316L

6、驅動方式：手動式

1. Nominal diameter: dn15-1000mm

2. Nominal pressure: pn1.0-6.4mpa

3. Applicable media: water, oil, sewage, acid and alkali

4. Applicable temperature: ≤ 300 ℃

5. Material: stainless steel 304.316.316l

6. Driving mode: Manual

三、進口不銹鋼閘閥結構優點： 

采用奧氏體不銹鋼，對氧化性酸介質擁有良好的耐蝕性。

介質流經不銹鋼閘閥時不改變其流動方向，流體阻力小。

閘板運動方向與介質流動方向相垂直，啟閉力矩小，開閉較省力。

介質流動方向不受限制，不擾流、不降低壓力，介質可從閘閥兩側任意方向流過、均能達到使用的目的，最適用于介質流動方向可能改變的管路中。

閘板垂直置于閥體內，結構長度較短。

密封性能好。全開時密封面受沖蝕較小。

Austenitic stainless steel has good corrosion resistance to oxidizing acid medium.

When the medium flows through the stainless steel gate valve, the flow direction is not changed, and the fluid resistance is small.

The movement direction of the ram is perpendicular to the flow direction of the medium, the opening and closing moment is small, and the opening and closing is labor-saving.

The flow direction of medium is unrestricted, does not disturb the flow and does not reduce the pressure. The medium can flow in any direction from both sides of the gate valve to achieve the purpose of use. It is most suitable for the pipeline where the flow direction of medium may change.

The ram is vertically placed in the valve body, with short structure length.

Good sealing performance. When fully open, the sealing surface is less eroded.