進口衛生級減壓閥質量就是好德國洛克《DE LOCKE》

一、進口衛生級減壓閥描述：

德國LOCKE洛克進口衛生級減壓閥是通過調節，將進口壓力減至某一需要的出口壓力，并依靠介質本身的能量，使出口壓力自動保持穩定的閥門，采用德國316L不銹鋼制造，閥體內腔及表面采用高精度鏡面拋光處理，通過德國FDA食品藥品衛生認證，是食品藥品企業及純水處理使用衛生級減壓閥首選。

Locke lock imported sanitary pressure reducing valve is a valve which can reduce the inlet pressure to a certain required outlet pressure by adjusting, and automatically maintain the outlet pressure stable by relying on the energy of the medium itself. It is made of 316L stainless steel in Germany. The inner cavity and surface of the valve body are polished with high precision mirror surface. It has passed the German FDA food and drug hygiene certification. It is a food and drug enterprise and a pure one Sanitary pressure reducing valve is preferred for water treatment.

二、進口衛生級減壓閥參數：

1、規    格：DN40-DN50 ，11/2"-2"

2、標    準：ISO，IDF，DIN, 3A ，SMS

3、適用溫度：-20°~180°

4、閥前最高壓力：2.5MPA

5、閥后調節壓力：0.065~2.0MPA

6、閥體材質：SUS304，SUS316L

7、接口方式：螺紋，快裝，焊接，法蘭

8、密封圈材質：EPDM， FPM ，SI

9、適用介質：蒸汽，氮?dú)?，二氧化碳，水?/font>

10、應用范圍：乳制品、啤酒、食品、飲料

1. Specification: dn40-dn50, 11 / 2 "- 2"

2. Standard: ISO, IDF, DIN, 3a, SMS

3. Applicable temperature: - 20 ° ~ 180 °

4. Maximum pressure in front of valve: 2.5MPa

5, after adjusting pressure: 0.065~2.0MPA

6. Valve body material: SUS304, SUS316L

7. Interface mode: thread, quick assembly, welding, flange

8. Seal ring material: EPDM, FPM, Si

9. Applicable media: steam, nitrogen, carbon dioxide, water, etc

10. Application: dairy products, beer, food and beverage

三、進口衛生級減壓閥主要零件材料：

1、閥體：不銹鋼

2、閥蓋：不銹鋼

3、隔膜：帶加強尼龍或全金屬

4、閥座填料及密封元件：FKM，NBR

5、彈簧：鋼

6、法蘭及法蘭接頭:不銹鋼

7、緊固件-------不銹鋼

1. Valve body: stainless steel

2. Bonnet: stainless steel

3. Diaphragm: with reinforced nylon or all metal

4. Seat packing and sealing element: FKM, NBR

5. Springs: Steel

6. Flange and flange joint: stainless steel

7. Fasteners - stainless steel

四、進口衛生級減壓閥結構特點：

1：平衡式減壓結構，提高輸出壓力穩定性。

2：設有膜片磨損或破裂時的安全泄壓孔。

3：防松螺母可以控制調節螺桿的設定。

4：溫度范圍：-20-60℃，重量：5.2KG，最大流量：200m3/h

5：零部件按HG20202要求清洗，閥體內外表面鏡面拋光處理，滿足GMP潔凈要求，適合純氧環境下使用。

6：100%通過工廠測試。

1: Balanced pressure reducing structure improves output pressure stability.

2: A safety relief hole is provided when the diaphragm is worn or broken.

3: The setting of the adjusting screw can be controlled by the locknut.

4: Temperature range: - 20-60 ℃, weight: 5.2kg, maximum flow: 200m3 / h

5: The parts shall be cleaned according to the requirements of hg20202, and the internal and external surfaces of the valve body shall be polished to meet the GMP cleaning requirements, which is suitable for use in pure oxygen environment.

6: 100% factory tested.