找商網手機端：m.zhaosw.com
江陰市福鼎通訊器材有限公司
手機掃碼查看 移動端的落地頁
店齡6年 · 
企業認證 · 
江蘇省無錫市 
江陰市福鼎通訊器材有限公司
主營產品：
钳钶钻钳钼钹钼钸钼钺钳
收藏 
電磁無源貼片蜂鳴器SMD-140035H頂發音常州現貨可定制廠家直銷
價格
訂貨量(pcs)
￥1.80
≥1000
店鋪主推品 熱銷潛力款
聯系人 陳紅波
钳钶钻钳钼钹钼钸钼钺钳
發貨地 江蘇省無錫市
在線客服
江陰市福鼎通訊器材有限公司
店齡6年 企業認證
聯系人
陳紅波
聯系電話
钳钶钻钳钼钹钼钸钼钺钳
所在地區
江蘇省無錫市
主營產品
進入店鋪
收藏本店
商品參數
|
商品介紹
|
聯系方式
類型： 電磁式蜂鳴器
驅動方式： 無源蜂鳴器
工藝： 貼片蜂鳴器
尺寸: 14 x 11 x H3.5
額定電壓： 5V
商品介紹
蜂鳴器
產品名稱：SMD-140035H
類型： 電磁式蜂鳴器
驅動方式： 無源蜂鳴器
工藝： 貼片蜂鳴器
尺寸:14 x 11 x H3.5
頻 率： 2731Hz
音 壓：min87dB
額定電壓：5V
阻抗：40
A. SCOPE
This specification applies magnetic buzzer, SMD-140035H-05027R40
B. SPECIFICATION
| No. | Item | Unit | Specification | Condition |
1 | Oscillation Frequency | Hz | 2731 | Vo-p=1/2duty , square wave |
2 | Operating Voltage | Vo-p | 4~ 6 | |
3 | Rated Voltage | Vo-p | 5 | |
4 | Current Consumption | mA | MAX. 80 | at Rated Voltage |
5 | Sound Pressure Level | dB | MIN. 87 | at 10cm at Rated Voltage |
6 | Coil Resistance | Ω | 40±4 | |
7 | Operating Temperature | ℃ | -40 ~ +85 | |
8 | Storage Temperature | ℃ | -40 ~ +90 | |
9 | Dimension | mm | 14 x 11 x H3.5 | See appearance drawing |
10 | Weight (MAX) | gram | 1.0 | |
11 | Housing Material | LCP( Black ) | ||
12 | Leading Pin | Tin Plated Brass(Sn) | See appearance drawing | |
13 | Environmental | RoHS |
C. APPEARANCE DRAWING 
Tol : ± 0.5 Unit: mm
D.TESTING METHOD
Standard Measurement conditions
Temperature:25±2℃ Humidity:45-65%
Acoustic Characteristics:
The oscillation frequency, current consumption and sound pressure are measured by the measuring instruments shown below
In the measuring test, buzzer is placed as follows:
E. Typical Frequency Response Curve
F. Recommend Driving Circuit 
The base current Ib should high enough so that it saturates the collector current of the transistor with the CB load.
G. Soldering Condition
(1)Recommendable reflow soldering condition is as follows
(Reflow soldering is twice)
Note:It is requested that reflow soldering should be executed after heat of product goes down to normal.
Heat resistant line
(Used when heat resistant reliability test is performed)
(2)Manual soldering
Manual soldering temperature 350 ℃ within 5 sec.
H. RELIABILITY TEST
NO. | ITEM | TEST CONDITION AND REQUIREMENT |
1 | High Temperature | After being placed in a chamber with 90 |
2 | Low Temperature | After being Placed in a chamber with -40 |
3 | Humidity Test | After being Placed in a chamber with 90-95% R.H. at 40 |
4 | Temperature Cycle | The part shall be subjected to 5 cycles. One cycle shall be consist of: |
5 | Drop Test | Drop on a hard wood board of 4cm thick, any directions ,6 times, at the height of 75cm . |
6 | Vibration Test | After being applied vibration of amplitude of 1.5mm with 10 to 55 Hz band of vibration frequency to each of 3 perpendicular directions for 2 hours . |
7 | Solderability | Lead terminals are immersed in rosin for 5 seconds and then immersed in solder bath of +300 |
8 | Terminal Strength | The force of 9.8N(1.0kg) is applied to each terminal in axial direction for 10 seconds. |
2℃ for 96 hours and then being placed in normal condition for 2 hours.
TEST CONDITION.
Standard Test Condition : a) Temperature : +5 ~ +35℃ b) Humidity : 45-85% c) Pressure : 860-1060mbar
Judgment Test Condition : a) Temperature : +25 ± 2℃ b) Humidity : 60-70% c) Pressure : 860-1060mbar
I. PACKING STANDARD 
聯系方式
公司名稱 江陰市福鼎通訊器材有限公司
聯系賣家 陳紅波 
（QQ：1570156949）
（QQ：1570156949） 電話 钺钼钳钺-钻钸钼钻钹钺钻钷
手機 钳钶钻钳钼钹钼钸钼钺钳
網址 http://www.fudingchina.com/cn
地址 江蘇省無錫市
陳紅波
钳钶钻钳钼钹钼钸钼钺钳
掃碼查看 掃碼查看
手機掃碼 快速查看
在線客服 
