宏旭  人字骨架護坡模具  現澆人字骨架護坡模具

人字骨架護坡模具  現澆人字骨架護坡模具的尺寸選擇主要是根據高速公路、高鐵的建設而言的，一般常規的尺寸在三米左右，屬于型號較大的鋼模具了，不過更大或更小的模具都是存在的，一般大都是使用三毫米的面板五毫米的筋板經過一定的處理制作成型的，再加上螺栓的使用是模具的整體規格更加準確了，并且根據按需定制的方式能使他的形狀、尺寸都很好的適應坡道上的生產情況，這種人字骨架護坡模具  現澆人字骨架護坡模具批量的使用在坡道上進行，按照生產的需求將其鋪設坡道上，在鋪設時要保障各套模具間的相互位置是準確的，這樣在澆注混凝土使模具才會穩定的運行，用來連接的螺栓在施工前也要確定他的緊固程度，每個步驟都嚴格的操作，人字骨架護坡模具  現澆人字骨架護坡模具在進行正常的生產時才不會出現漏漿、變形的情況。因?yàn)槭褂玫幕炷猎鲜菚δ＞弋a(chǎn)生一定的磨損的，尤其是如果混凝土內的石子的含量過多的話就會對模具產生較大的損傷，增加了模具更換的次數，所以原料的選擇也是非常重要的。Herringbone skeleton slope protection mold The size selection of cast-in-place herringbone skeleton slope protection mold is mainly based on the construction of Expressway and high-speed railway. Generally, the conventional size is about three meters, which belongs to the steel mold with larger model. However, larger or smaller molds exist. Generally, the molds are made by using three millimeter faceplate and five millimeter stiffened plate after certain processing. In addition, the use of bolts is The overall specification of the die is more accurate, and the shape and size of the die can be well adapted to the production situation on the ramp according to the way of customization on demand. This herringbone skeleton slope protection die The cast-in-place herringbone skeleton slope protection mould is used in batches on the ramp. According to the production requirements, it is laid on the ramp. When laying, it is necessary to ensure that the mutual position of each set of mould is accurate, so that the mould can run stably when pouring concrete. The fastening degree of the bolt used for connection shall be determined before construction, and each step shall be strictly operated. Herringbone skeleton protection The slope mold cast-in-place herringbone skeleton slope protection mold will not leak and deform during normal production. Because the concrete raw materials used will cause certain wear to the mold, especially if the content of stone in the concrete is too much, it will cause great damage to the mold and increase the number of mold replacement, so the selection of raw materials is also very important.