植草式生態框模具是根據當前眾多型號的護坡磚需要預制而開發的新的模具，  植草式生態框模具  魚巢式生態框模具屬于大型護坡模具，所以一般都是用鋼板材質，這樣能夠保證模具的長期使用。植草式生態框模具在進行加工時可以根據實際的施工情況進行定制的，這樣制作的產品可以很好的切合實際的施工情況，與各個部分可以結合的沒有大的縫隙，也可以使用多個標準件，這樣成本更低。設計的圖紙一般是需要顧客自己進行提供的護坡模具的生產施工方只負責進行生產。將圖紙交由工廠的工人進行加工，利用注塑機進行注塑操作，隨后壓塑成型，這樣制作的模具的形狀是很標準的，并且使用壽命很長，不需要經常地更換，這就給顧客省去了很多的麻煩，并且成本也會有所降低。因為在澆灌時會產生很大的壓力，如果河道護坡模具的抗壓能力不足的話，就會出現形狀上的變化或者是出現損壞的情況，所以就需要設計有延長筋，這樣在使用時就可以承受很大的壓力，不容易損壞。模具需要對內腔的進行檢查，盡量保證內腔的光滑，在進行脫模時不容易出現粘連的情況。塑料模具的厚度并沒有一個嚴格的標準，一般是3mm到5mm，也可以選擇進行加厚。Grass planting ecological frame mold is a new mold developed according to the prefabrication of many types of slope protection bricks. Grass planting ecological frame mold fish nest ecological frame mold belongs to large slope protection mold, so it is generally made of steel plate, which can ensure the long-term use of the mold. The grass planting ecological frame mold can be customized according to the actual construction situation during processing. The products produced in this way can be well in line with the actual construction situation. There is no large gap with each part, and multiple standard parts can also be used, so the cost is lower. The design drawings generally need to be provided by customers. The construction party is only responsible for the production of slope protection molds. The drawings are handed over to the factory workers for processing, the injection molding operation is carried out by the injection molding machine, and then the compression molding is carried out. The shape of the produced mold is very standard, and the service life is very long. It does not need to be replaced frequently, which saves customers a lot of trouble and reduces the cost. Because great pressure will be generated during pouring. If the compressive capacity of the river slope protection mold is insufficient, there will be changes in shape or damage. Therefore, it is necessary to design extension reinforcement, so that it can bear great pressure and can not be easily damaged. The inner cavity of the mold needs to be checked to ensure that the inner cavity is smooth as far as possible, and adhesion is not easy to occur during demoulding. There is no strict standard for the thickness of plastic molds, which is generally 3mm to 5mm. Thickening can also be selected.