河北宏旭模具專業(yè)生產流水槽鋼模具、水泥流水槽模具、急流槽鋼模具、卵型槽模具，U型槽模具，縫隙式排水槽模具，防浪塊模具，隔離帶模具，安全島模具，路沿石鋼模具，拱形骨架護坡鋼模板，扭王字塊模具，擋土墻模具，四腳空心方塊模具，防撞墻模具，箱體式護坡模具，生態(tài)擋墻砌塊模具，植草式護坡模具，L型擋土墻模具，框格護坡模具，排水溝鋼模具、泄水槽模具，農田灌溉U型槽模具，遮板模具，邊溝模具，水溝模具等。我廠所有鋼模具采用3-8mm鋼板焊接而成，每個型面都可打開，使用方便、出?？?，成品效果好，我廠鋼模具在使用過程中，首先在模具里面刷上機油和脫模劑，有利于脫模具，然后將攪拌好的水泥或混凝土倒入模具中，經振動平臺振動成形，或振動棒振搗，等水泥初期凝固之后便可脫模，約24小時左右。Hebei Hongxu mould is specialized in producing water channel steel mould, cement water channel mould, rapid flow channel steel mould, egg shaped groove mould, U-shaped groove mould, slot drainage channel mould, wave proof block mould, isolation belt mould, safety island mould, roadside stone steel mould, arch skeleton slope protection steel mould, Accropode block mould, retaining wall mould, four legged hollow block mould and anti-collision wall mould, Box type slope protection mold, ecological retaining wall block mold, grass planting slope protection mold, L-type retaining wall mold, frame slope protection mold, drainage ditch steel mold, drainage ditch mold, farmland irrigation U-groove mold, shutter mold, side ditch mold, ditch mold, etc. All steel molds in our factory are welded with 3-8mm steel plates. Each profile can be opened, which is convenient to use, fast to mold and good effect of finished products. In the process of using the steel molds in our factory, first brush the oil and release agent inside the molds to facilitate mold removal, and then pour the mixed water mud or concrete into the molds, which are formed by vibration on the vibration platform or vibrated with a vibrating rod, After the initial setting of cement, it can be demoulded for about 24 hours.