阿科牧機械有限公司，一直致力于工業溫度控制設備的研發、生產和銷售。阿科牧公司生產的產品有：模溫機,壓鑄模溫機(鋁鎂合金壓鑄油溫機),導熱油電加熱器,工業冷凍機(水冷式冷水機、風冷式冷水機),熱油溫控系統、模具油加熱器、模具水加熱器,橡膠硫化模板油加熱器,風電葉片模具水加熱器，高光無痕蒸汽注塑（RHCM冷熱成型技術），橡膠擠出機用模溫機組，熱壓模具導熱油加溫，層壓板油加溫機、油溫機等工業溫度控制設備.

溫控范圍：水-35-180度.油45-350度

高光蒸汽模溫控制機簡介

Brief introduction to high-gloss steam mold temperature controller

高光蒸汽模溫控制機是采用高光蒸汽，當注塑機合模后吹入高光蒸汽，首先打模具溫度提高到一個設定值，然后開始給模腔塑膠，在注塑機完成保壓轉入冷卻后，開始注入冷卻水，模具溫度很快下降到一個設定值后開模，再向模具吹入空氣把冷卻水完全吹走，完成整個注塑過程。阿科牧開發的高光蒸汽模溫控制機，整機備有高光蒸汽模溫控制機和冷水增壓系統，并增加了熱水和冷卻水回收系統，節能效果顯著，利潤也相當可觀，這是阿科牧高光過熱水模溫控制機的優勢所在。

The high-gloss steam mold temperature controller employs high-gloss steam. When high-gloss steam is blown into the clamped injection molding machine, it is necessary to increase the mold’s temperature to a set value before conducting plastic injection into the mold cavity. After the injection molding machine finishes the pressure maintaining and starts the cooling procedure, cooling water will be injected then. Mold opening will start after the mold’s temperature drops quickly to a set value, and air will be blown into the mold to remove the cooling water thoroughly, thus finishing the entire injection. The Company’s newly developed high-gloss mold temperature controller has a high-gloss steam mold temperature controller and a cold-water pressurizing system and the extra designed hot/cooling water recovery system, promising outstanding energy-saving effect and great profit. It is the advantage of Aode superheated water high-gloss mold temperature controller.

高光蒸汽模溫控制機應用

Application of high-gloss steam mold temperature controller

目前在家電、汽車、通訊、日用品、器械等行業具有廣泛的應用前景，例如液晶電視機、電腦液晶顯示器、筆記本電腦、手機、空調、汽車液晶顯示器、汽車內飾件、車燈和光學、OA、AV儀器等行業。

At present, it enjoys extensive application prospects in industries like household electrical appliances, automobiles, communications, articles for daily use, and medical instruments. Particularly, it is widely applied to LCD TV sets, computer LCDs, notebook PCs, mobile phones, air-conditioners, auto LCD, automobile internal ornaments, car lamps, photic, OA and AV instruments, etc.

高光蒸汽輔助成型控制機背景

Background of high-gloss aided molding controller

伴隨著人們對電器和電子的整體要求越來越高，對于相關塑料殼外觀的要求也越來越苛刻。通常情況下，為了彌補塑料制品的表面缺陷，需要通過后續噴涂的方式來解決表面的缺陷問題，但這樣會給產品帶來不環保的問題。

With the higher and higher requirements of people for electric appliances and electronics, their requirements for the appearance of relevant plastic shells are stricter and stricter. Generally speaking, the method to make up the surface defects of plastic products is follow-up spraying, which will make products less environment friendly.

高光蒸汽輔助成型控制機簡介

Brief introduction to high-gloss aided molding controller

高光蒸汽輔助成型控制機技術是采用高溫蒸汽，當注塑機合模后注入高溫蒸汽，首先把模具溫度提高到一個設定溫度值，然后開始給模腔塑膠，在注塑機完成保壓后迅速注入冷卻水或冷凍水，使之模具在短時間內降到一個設定的溫度值后開模，再向模具吹入空氣把殘余的冷水吹走，完成一個周期的注塑過程，通過這種迅速冷熱方式控制塑料的成型可以完全解決塑料件的外觀缺陷，大大提高生產效率。

In terms of technology, high-temperature steam is injected into the clamped injection molding machine. It is necessary to increase the mold’s temperature to a set value before conducting plastic injection into the mold cavity. After the injection molding machine finishes pressure maintaining, cooling water or chilled water will be injected into the mold cavity quickly. Mold opening will start after the mold’s temperature drops quickly to a set value in a short time, and air will be blown into the mold to remove the residual cooling water thoroughly, thus finishing the injection molding of a period. Such control of the molding of plastics through quick heating and cooling can avoid the appearance defects of plastic products thoroughly, improving production efficiency

ignificantly.