防撞隔離墩鋼模具要注重細微之處的變化，避免因為變化致使模具的老化程度加快，我們在制作完成以后要將其進行一個包裝入庫，我們的包裝要做到整潔且嚴密，而且一些有問題或者老化的模具是禁止和這些新的模具放在一起的，防撞隔離墩鋼模具，我們要保證倉庫的整潔程度，里面的濕度不能太高防止氧化，同時不能和一些腐蝕性高的產品放到一起，我們要對防撞隔離墩鋼模具進行一個防潮處理，防止在安置的時候出現(xiàn)變色和龜裂的情況。

The anti-collision and isolation pier steel mould shall pay attention to the change of the details to avoid the accelerated aging of the mould due to the change. After the completion of the production, we shall carry out a package and put it into the warehouse. Our package shall be clean and tight, and some mould with problems or aging shall not be put together with these new moulds. The anti-collision and isolation pier steel mould shall be guaranteed The cleanliness and humidity of the warehouse should not be too high to prevent oxidation. At the same time, it should not be put together with some products with high corrosiveness. We should carry out a moisture-proof treatment on the steel mould of the anti-collision and isolation pier to prevent discoloration and cracking during the placement.