QAIO 2/2模擬模塊
概述
QAIO 2/2模擬模塊用于MSC I或MSC IIMotion控制器的輸入和輸出（I/0）的本地?cái)U(kuò)展。該模塊安裝在DIN導軌上，并直接連接到MSC I或MSC II運動控制器
通過內部擴展總線（E-bus）。
QAIO 2/2具有以下輸入和輸出：
2個模擬輸入，每個可在Moog AxisControl軟件（MACS）開發環境中配置為+10V、+10mA或4To20mA。輸入在多路操作中轉換
●1參考電壓輸出：參考電壓源提供+10V的短路保護電壓
●2個模擬輸出，每個+10 V，另外可在MACS軟件中單獨配置為+10 mA、+50 mA或4至20 mA，并進行線路故障監測1個24 V脈沖輸入，可用作計數器輸入或頻率測量輸入
在前端，4個LED提供有關重要模塊功能狀態的信息。
模擬I/0的配置通過MACSdevelopment環境中的控制配置通過軟件執行?？梢允褂脙蓚€(gè)模擬輸入或脈沖輸入。模擬擴展模塊的I/0直接由MSC I或MSC II運動控制器通過
電動巴士。所有輸入和輸出數據在E-Bus的一個周期內傳輸。
一個MSC |或MSC II運動控制器最多可擴展7個QAIO 2/2-模塊。不可能將其與QAIO 16/4組合在一個電子總線段上。
QAIO 2/2 ANALOG MODULE
Overview
The QAIO 2/2 analog module is used for local extensionof the inputs and outputs (I/0) of the MSC I or MSC IIMotion Controller. The module is mounted on a DIN rail anddirectly connected to an MSC I or MSC II Motion Controller
via the internal Extension bus (E-Bus).
The QAIO 2/2 has the following inputs and outputs:
2 analog inputs, each configurable in the Moog AxisControl Software (MACS) development environmentas+10V,+10mAor4to20mA.Theinputsareconverted in multiplex operation
●1 reference voltage output: The reference voltagesource provides a short circuit protected voltage of+10V
●2 analog outputs, each +10 V, additionally individuallyconfigurable in the MACS software as +10 mA, +50 mAor 4 to20 mA with wire fault monitoring
1 pulse input 24 V useable as counter input orfrequency measurement input
On the front, 4 LEDs provide information about the statusof important module functions.
The configuration of the analog I/0 is carried out persoftware via the central control configuration in the MACSdevelopment environment. Either the two analog inputs orthe pulse input can be used.The I/0 of the analog extension module is actuateddirectly from an MSC I or MSC II Motion Controller via the
E-Bus. All input- and output-data is transferred within onecycle of the E-Bus.
One MSC | or MSC II Motion Controller can be extendedwith a maximum of 7 QAIO 2/2- modules. It is notpossible to combine it with QAIO 16/4 on one E-Bussegment. .
VMI-PMC5666
VMI-PMC-5666
VMI-PMC5720
VMI-PMC5790
VMI-PMC5795
VMI-PMC5797
VMI-PMC6100
VMI-PMC6101
VMI-PMC7440
VMI-PMC7450
VMI-PMC7462
VMI-PMC7463
VMIVME-017614-132
VMIVME-017807-413000
VMIVME-017807-414001
VMIVME-1128
VMIVME-1150
VMIVME-1150-123L
VMIVME-1182
VMIVME-2128
VMIVME-2210
VMIVME-2510B
VMIVME-2532A
VMIVME2533
VMIVME-2533
VMIVME-2536
VMIVME-2536-000
VMIVME-3100
VMIVME-3111
VMIVME-3122-020