民族樂器PXIe-5652(零件號:781217-01)是一個模擬信號發生器具有連續波產生能力和FM、2 FSK或OOK調制。該模型可以連續產生調幅、調頻、調相和脈沖波信號。這倪PXIe-5652支持500 kHz - 6.6 GHz的頻率范圍，以及% 3c 3Hz-6Hz的頻率分辨率范圍，模塊寬度為1。該型號的最大輸出功率為12 dBm，典型調諧時間為1.5 ms。它可以與其他PXI模塊結合使用，為雷達、RF集成電路(RFICs)和汽車測試應用設計自動化測試系統。

這PXIe 5652在單個3U PXI插槽中提供出色的相位噪聲和信號抖動。該型號的掃頻調諧速度典型值為%3C2 ms，頻率分辨率為%3C 1 ppb，相位噪聲在1 GHz時為-110 dBc/Hz，典型失調為10 kHz。這倪PXIe 5652具有正弦、三角和方波頻率調制波形類型。該型號不支持外部調制源。這個的調制波形頻率模擬信號發生器范圍從1赫茲到100千赫茲。

這PXIe-5652 射頻模擬信號發生器需要安裝應用程序開發環境，如LabVIEW或LabWindows/CVI。之后，可以在計算機上安裝NI-RFSG驅動程序軟件。該器件有一個RF輸出連接器、RF輸入/輸出連接器、REF OUT2連接器。REF OUT和REF OUT2連接器的頻率為10 MHz。

這PXIe-5652 PXI模擬信號發生器具有10 MHZ的內部基準輸出頻率、50ω的輸出阻抗和1 Vpk-pk至50ω的幅度。外部基準輸入頻率為10 MHz±10 ppm，輸入阻抗為50ω，幅度為0.2 Vpk-pk至1.5 Vpk-pk至50ω。該器件的預熱時間為30分鐘，工作溫度范圍為0°C至55°C；和10%至90%的相對濕度范圍。這倪PXIe-5652是一個3U單插槽PXI快速模塊，尺寸為0.8英寸?！?5.1英寸?！?8.5英寸。，重14.6盎司。該設備應至少每年校準一次。

The National Instruments PXIe-5652 (Part Number: 781217-01) is an Analog Signal Generator with continuous-wave generation capabilities and FM, 2?FSK, or OOK modulation. This model can generate AM, FM, PM, and pulse wave signals continuously. The NI PXIe-5652 supports a frequency range from 500 kHz - 6.6 GHz, and a frequency resolution range from <3 Hz to 6 Hz, with a module width of 1. This model has a maximum output power of 12 dBm and a typical tuning time of 1.5 ms. It can be combined with other PXI modules to design automated test systems for radar, RF integrated circuits (RFICs), and automotive test applications.

The PXIe?5652 provides exceptional phase noise and signal jitter in a single 3U PXI slot. This model features <2 ms Frequency Sweep Tuning Speed Typical, < 1 ppb Frequency Resolution, and -110 dBc/Hz phase noise at 1 GHz, 10 kHz offset typical. The NI PXIe?5652 features sine, triangle, and square frequency modulation waveform types. This model does not support an external modulation source. The modulation waveform frequency for this Analog Signal Generator ranges from 1 Hz to 100 kHz.

The PXIe-5652 RF Analog Signal Generator requires the installation Application Development Environment like LabVIEW or LabWindows/CVI. After that, the NI-RFSG driver software can be installed on the computer. The device has a RF OUT connector, RF IN/OUT connector, REF OUT2 connector. The REF OUT and REF OUT2 connector has a frequency of 10 MHz.

The PXIe-5652 PXI Analog Signal Generator features an Internal Reference Output frequency of 10 MHZ, an output impedance of 50 Ω, and an amplitude of 1 Vpk-pk into 50 Ω. The external Reference Input frequency is 10 MHz ±10 ppm, input impedance is 50 Ω, and amplitude is 0.2 Vpk-pk to 1.5 Vpk-pk into 50 Ω. The device has a warm-up time of 30 minutes, with an operational temperature range of 0 °C to 55 °C; and a relative humidity range of 10% to 90%. The NI PXIe-5652 is a 3U, one slot, PXI Express module with dimensions of 0.8 in. × 5.1 in. × 8.5 in., which weighs 14.6 oz. The device should be calibrated at least once a year.