廈門雄霸電子商務有限公司
主營產品: 集散式控制系統, 可編程控制系統, 伺服系統, 機器人系統
National-Instruments-SCXI-1335-螺絲端子-接線盒
價格
訂貨量(個)
¥4500.00
≥2
店鋪主推品 熱銷潛力款
㠗㠙㠙㠛㠓㠘㠖㠘㠙㠖㠔
在線客服
廈門雄霸電子商務有限公司
店齡3年 企業認證
聯系人
張先生 銷售經理
聯系電話
㠗㠙㠙㠛㠓㠘㠖㠘㠙㠖㠔
經營模式
經營批發
所在地區
福建省廈門市
主營產品
將端子擰在鎳SCXI-1335(零件號:777687-35)使用戶能夠配置SCXI-1129作為8 × 32矩陣的模塊。這SCXI-1335此外,還包含掃描儀高級輸出和外部輸入觸發信號的端子,兩個128針DIN連接器,用于關聯模塊之間的段,以及10針接頭,用于利用延長線連接模塊之間的行。矩陣擴展線連接行以擴展段的數量。
這接線盒符合電磁兼容性輻射(10米處的EN 55011 A級)、1 GHz以上抗擾度的FCC部分15A(EN 61326:1997+A2:2001)和EMC/EMI (CE、C-Tick和FCC部分15)。該模型中的擴展鏈路關聯四個差分信號。隨后,用戶應該使用兩個網絡擴展鏈路來進行每次擴展鎳SCXI-1335因為它有八排。
這鎳SCXI-1335信道對地電壓為150 V,安裝類別I信道對信道為150 V,最大電流(每信道)為2 ADC和2 AAC,濕度在10%至90% RH之間,在海拔高達2,000 m(僅限室內使用)時的污染度為2級。本項目旨在滿足UL IEC 61010-1、EN 61010-1 3111-1、UL 61010B-1和CAN/CSA C22.2 No. 1010.1估算、控制和研究領域電氣設備安全標準的要求。
Screw terminals on the NI SCXI-1335 (Part Number: 777687-35) enable the user to configure the SCXI-1129 module as an 8 × 32 matrix. The SCXI-1335 additionally contains terminals for scanner advanced output and outside input trigger signals, two 128-pin DIN connectors for associating segments amongst modules, and 10-pin headers for interfacing rows between modules utilizing expansion wires. The matrix extended wire interfaces rows to extend the quantity of segments.
This Terminal Block complies with Electromagnetic Compatibility Emissions (EN 55011 Class A at 10 m), FCC Part 15A over 1 GHz Immunity (EN 61326:1997 + A2:2001), and EMC/EMI (CE, C-Tick, and FCC Part 15). The expansion links in this model associate four differential signals. Subsequently, the user should utilize two network extension links for every expansion with the NI SCXI-1335 because it has eight rows.
The NI SCXI-1335 has a channel-to-earth voltage of 150 V, an Installation Category I channel-to-channel of 150 V, a maximum current (per channel) 2 ADC and 2 AAC, a humidity between 10 to 90% RH, and pollution degree of 2 approved at altitudes up to 2,000 m (indoor use only). This item is intended to meet the requirements of the IEC 61010-1, EN 61010-1, UL 3111-1, UL 61010B-1, and CAN/CSA C22.2 No. 1010.1 standards of safety for electrical equipment in estimation, control, and research fields.
SCXI-1335 Obsolete Status has been announced by National Instruments, but the Terminal Block will s