這SCXI-1313A(零件號:777687-13A)可以與SCXI-1125模塊。這屏蔽接線盒有18個螺絲端子，確保與模塊的簡單信號連接。使用所需的項目SCXI 1313A包括:的接線盒，的SCXI-1125模塊、一個SCXI或PXI/SCXI組合機箱、必要的布線和傳感器(基于用戶的應用)、一個電線絕緣剝線鉗、一個鋼絲鉗、尖嘴鉗、1號和2號十字螺絲刀以及一個1/8英寸。平頭螺絲刀。用戶還需要每臺設備的文檔/手冊，以確保正確、安全地安裝接線盒。

用戶應該記住SCXI-1313是的指示符SCXI-1313和SCXI-1313A在測量和自動化瀏覽器和鎳DAQ軟件。上的校準EEPROM接線盒保存給出軟件校正值的校準常數。然后，應用開發軟件利用這些值來調整衰減電路中增益誤差的測量值。用戶可以使用大量樣本的平均值來獲得最精確的讀數。為了更加精確，嘈雜的環境需要大量的樣本。

這國家儀器公司SCXI 1313A接線板是CAT II測量類儀器，輸入范圍為150 Vrms或VDC。該型號有8個輸入通道，一個熱敏電阻冷結傳感器，0至50°C范圍內的輸出為1.91至0.65 V，端子板入口處有一個應變消除條。

The SCXI-1313A (Part Number: 777687-13A) can be used with the SCXI-1125 module. This Shielded Terminal Block has 18 screw terminals that ensure simple signal connection with the module. The items required to use the SCXI 1313A include: the Terminal Block, the SCXI-1125 module, an SCXI or PXI/SCXI combination chassis, cabling and sensors necessary (based on the user’s application), a wire insulation stripper, a wire cutter, long nose pliers, Number 1 and 2 Philips-head screwdrivers, and a 1/8 in. flathead screwdriver. The user also needs the documentation/manuals for each device being used to guarantee proper and safe installation of the Terminal Block.

The user should keep in mind that SCXI-1313 is the designator for the SCXI-1313 and the SCXI-1313A in Measurement & Automation Explorer and NI-DAQ software. The calibration EEPROM on the Terminal Block saves calibration constants that give software correction values. The values are then utilized by the application development software to adjust the measurements for gain mistakes within the attenuation circuitry. The user can use an average for a huge number of samples to acquire the most precise reading. Loud conditions necessitate a high number of samples for more preciseness.

The National Instruments SCXI 1313A Terminal Block is a CAT II Measurement category instrument with an input range of 150 Vrms or VDC. This model has 8 input channels, a thermistor cold-junction sensor, an output of 1.91 to 0.65 V from 0 to 50 °C, and a strain relief bar at the terminal-block entrance.