這倪SCXI-1306(零件號:779698-01)是為了與SCXI-1503 RTD模塊。這接線盒被屏蔽以允許快速、簡單的信號連接，并且容易安裝到模塊的前面。這SCXI 1306有16對用于差分輸入信號的螺絲端子和另外16對用于電流激勵信號的螺絲端子。

這國家儀器公司SCXI-1306接線板可以對傳感器進行2線、3線和4線電阻測量，包括RTD和熱敏電阻。每個通道都可以配置為電壓或電阻測量。每個通道有兩個開關，可用于選擇測量類型。此外，16個差分模擬通道可以用來完成浮空和接地電壓測量。熱電偶測量是浮動測量的特征。對于浮動或接地電壓測量，用戶可以將電壓源連接到模擬輸入螺釘端子。然后，用戶可以根據測量的信號類型修改開關位置。當用戶測量浮動信號時，他們可以將負輸入連接到SCXI-1503 RTD模塊的內部接地。

的一個有益特性是鎳SCXI-1306接線板集成的溫度傳感器。該特性可用于熱電偶冷結補償。為確保精確的冷結補償，用戶不得將SCXI機箱放在任何極端溫差附近。NI還建議對大量樣本進行平均，以獲得精確讀數。

The NI SCXI-1306 (Part Number: 779698-01) was created to be used with the SCXI-1503 RTD Module. This Terminal Block is shielded to allow swift, simple signal connections and mounts easily to the front of the module. The SCXI 1306 has 16 pairs of screw terminals for differential input signals and 16 additional pairs of screw terminals for current excitation signals.

The National Instruments SCXI-1306 Terminal Block can perform 2-, 3-, and 4-wire resistive measurements of transducers, which includes RTDs and thermistors. Every channel can be configured for voltage or resistive measurements. There are two switches for every channel, which can be utilized to choose the measurement type. In addition, the 16 differential analog channels can be utilized to complete floating and grounded voltage measurements. Thermocouple measurements are characteristic for a floating measurement. For floating or grounded voltage measurements, the user can link the voltage source to the analog input screw terminals. Then, the user can modify the switch positions, based on the type of signal they are measuring. When the user is measuring floating signals, they can link the negative input to the internal ground of the SCXI-1503 RTD Module.

One of the beneficial features of the NI SCXI-1306 Terminal Block is the integrated temperature sensor. This feature can be utilized for thermocouple cold junction compensation. To ensure precise cold-junction compensation, the user must not keep the SCXI chassis near any extreme temperature differential. It is also recommended by NI to average a high quantity of samples for a precise reading.