這SCXI-1124(零件號:776572-24) 6通道是否隔離模擬輸出模塊用于靜態DC(低帶寬)電壓或電流信號。一個通道的最大更新速率為555 S/s，所有六個通道的最大更新速率均為125 S/s。這鎳SCXI-1124集成6個自主隔離的12位數模轉換器(DAC)通道。用戶可以設置每個通道的電壓或電流輸出。對于電壓，用戶可以選擇三個單極性或三個雙極性范圍。對于電流，每個通道輸出0至20 mA。

這模擬輸出模塊是軟件可配置的，集成了本地可用的EEPROM，用于保存校準常數。該模塊非常適合需要有限電壓或電流輸出來控制程序的應用。對于更多的頻道，用戶可以利用幾個倪SCXI 1124SCXI框架中的模塊，以及其他信號調理I/O模塊。

利用該模塊，用戶可以針對以下電壓輸出范圍對每個通道進行軟件編程:0至1、0至5、0至10、1、5或10 V。在單個模塊內，用戶可以逐步關聯通道，使每個模塊的輸出信號最高可達60 VDC。每個電壓通道都集成一個低阻抗輸出緩沖器，最高可驅動5 mA電流。

這SCXI 1124是通過SCXIbus數字傳輸?shù)?，所以一個DAQ小工具就能控制幾個鎳SCXI-1124模塊。在多路復用串行模式下，一個DAQ小工具控制至少一個SCXI-1124模塊通過SCXIbus利用串行計算機化信息慣例。這種活動方法最多使用模塊DAQ小工具的五條計算機化I/O線。

The SCXI-1124 (Part Number: 776572-24) is a 6-channel isolated Analog Output Module for static DC (low bandwidth) voltage or current signals. The maximum update rate is 555 S/s for one channel and 125 S/s per channel for all six channels. The NI SCXI-1124 incorporates six autonomously isolated, 12-bit digital-to-analog converter (DAC) channels. The user can arrange each channel for voltage or current output. For voltage, the user has the option to pick any of the accessible three unipolar or three bipolar ranges. For current, each channel outputs between 0 to 20 mA.

This Analog Output Module is software configurable and incorporates a locally available EEPROM for saving calibration constants. This module is perfect for applications requiring confined voltage or current outputs to control a procedure. For more channels, the user can utilize a few NI SCXI 1124 modules in a SCXI framework, alongside other signal conditioning I/O modules.

With this module, the user can software program each channel for the following voltage output ranges: 0 to 1, 0 to 5, 0 to 10, ±1, ±5, or ±10 V. Within a single module, the user can progressively associate channels to make output signals up to 60 VDC per module. Every voltage channel incorporates a low impedance output buffer that can drive up to 5 mA.

The SCXI 1124 is digitally over the SCXIbus, so a single DAQ gadget can control a few NI SCXI-1124 modules. In multiplexed serial mode, one DAQ gadget controls at least one SCXI-1124 module through the SCXIbus by utilizing a serial computerized information convention. This method of activity utilizes a maximum of five computerized I/O lines of the module DAQ gadget.